Guys i need some help
 

Looking for some hinges that are different than the actuator type typically used. The pic that I have is from a Statement boat, and I know now that they are made in house. They are beautiful. We are looking for something that is slightly different that attaches in the same manner. Any help or point of direction is appreciated.

Thanks Jeff

Personally Jeff, I would steer away from using that style of hinge design. If you have a crown in the deck & hatch that calls for a specialty hinge, you simply need to tool a flat mounting area to accept a more conventional design hinge. Hope this helps.

here is a pic of what I presently have....I looking for something better...
Thanks again guys, Jeff

I've got a guy up here that can do some impressive stuff with stainless steel. He builds dragsters for a living, but I have put him on some other projects, and he hasn't failed me yet. He even cut the neck off my Harley and built another that fit a pair of 20" over springer forks. If you can't find them I can talk to him.

http://www.danamarineproducts.com/Hinges.htm

http://www.danamarineproducts.com/Pr...5-b4f7155fd013

Found these

http://www.cpperformance.com/p-327-h...ch-hinges.aspx

same ones as above, just different vendor.

Eddiemarine has some hinges also.

http://www.eddiemarine.com/store/car...l&p=26319&c=27







=

I have this set from Dana and they work very well. Fast as hell too.

http://www.danamarineproducts.com/Pr...5-b4f7155fd013

thanks guys, I appreciate everyone's help. Jeff

Your Welcome! lol