Originally Posted by todayone (Post 3700731)

Due to the benefit label, this Bearpaw
christian louboutin shoes motivation might be the motivation for

Originally Posted by Robby Woods (Post 3699983)

Hey guys I'm new to the offshore powerboat world and I've got some questions that I'd be very grateful for answers. I've been all over the map from a DCB to a vintage Cigarette and after talking to everyone in the business and how I'd like to build a boat I've decided there is no option for me other than a Skater. Peter has been extremely helpful and eager to work with me. I race off road trucks for a living and also engineer and build them at our shop almost all in house. We have a CNC mill, lathe, and waterjet so I'm going to do most of it myself. Peter has been the only builder seriously interested in reasonably facilitating my project.
So I'll be buying a 32 flatdeck widened 12 inches, full wrap windshield and extended bussell, to accommodate the Arneson #7 drives. We'll be building a pair of injected 700 inch donovan big blocks in house. Rick has also been extremely helpful. So here it goes, please reference the question with your answers I'm super eager to hear your thoughts. Cheers Robby Woods

Engine: I hear that tolerances are much more loose in marine engines do to constant load. What tolerances do people speak of and any examples. How loose?

Closed Loop: Heat exchangers, Who makes them, what do you think of them?

Water Pump: Who makes a solid pump and what are your thoughts on stages?

Cam Shafts: Are there go to manufactures that will sell a proven cam package for the marine industry?

Power Steering: What kind of pump and who makes the best? Or do you prefer helm steering? Why?

Alternators: What are marine specific alternators? How many amps are sufficient?

Exhaust: Cooling before the heat exchangers or after?

Over View: We're going to build the engines as I mentioned before something like a 700 inch injected aluminum big blocks. I am at a loss where to start from a marinizing process from pumps, accessories etc...A loose outline of this would be awesome. Also would you like to see them mounted further forward with trans inboard or rearwards with trans in drives? Weight distribution

Drives: Peter likes the arneson and that was my first choice when I looked into this project. I like the simplicity and lack of drag. Any pros and cons other than the safety of them hanging out the back?

Thanks again I'm sure I'll have more questions as It progresses Please be as detailed as possible and any thoughts outside of what I asked would be awesome!

Originally Posted by Skater30 (Post 3700771)

Hey Robby, take my advice and listen to Rik and Pete. They've already built what you are building right now. My old '05 30' has naturally aspirated Sterling 588s and ASD7s. Why don't you get ahold of me and come up (I'm only an hour from Rik's shop) and we'll go out in my boat and see what you think. I can show you everything we did, why we did it, and you can see firsthand for yourself the results. I do agree with a lot of earlier posts that you are biting off a lot for your first high performance cat. I came from a professional motocross background when I got into high performance boating/racing, but I'm certainly glad I graduated from a 22' to a 28' to my 30' cat. I'm certain you are very talented, but as a pro, you know that what got you there was a LOT of practice! I honestly feel you'd be a lot safer starting off in a 368 with the same power - they are a lot more docile and forgiving boat than the 30s and 32s with that kind of power.

Originally Posted by flight club (Post 3700508)

I have 2 sets of 1500 Sterlings for sale. Quad whipple EFI and PSI with carbs. Selling cheaper than the parts cost to build your own

Originally Posted by Skater30 (Post 3700776)

http://www.youtube.com/watch?v=C4AcTX6PbEQ&sns=em

Here's a video of my 30 with 588 ci naturally aspirated pump gas motors running against my friend's 36 with 730 ci naturally aspirated pump gas motors. Do notice how smooth the water was. Had we been out in the SF Bay or past the Golden Gate, he would've left me with no problem.

Originally Posted by Skater30 (Post 3700776)

http://www.youtube.com/watch?v=C4AcTX6PbEQ&sns=em

Here's a video of my 30 with 588 ci naturally aspirated pump gas motors running against my friend's 36 with 730 ci naturally aspirated pump gas motors. Do notice how smooth the water was. Had we been out in the SF Bay or past the Golden Gate, he would've left me with no problem.

Originally Posted by flight club (Post 3700508)

I have 2 sets of 1500 Sterlings for sale. Quad whipple EFI and PSI with carbs. Selling cheaper than the parts cost to build your own

Originally Posted by drpete3 (Post 3700802)

these??????????? Oh yea!