Offshoreonly.com
Page 5 of 5
« First
3
4
5
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Rinda Merc Scanner Tool Issue (https://www.offshoreonly.com/forums/general-boating-discussion/277807-rinda-merc-scanner-tool-issue.html)

4bus 06-20-2012 07:32 AM
Originally Posted by akaboatman (Post 3713255)
Scan tool should have found that
He has an MEFI4 system which does not track misfires. Scan tool or ECU did not have a clue. Just goes to show sometimes you have to go back to basics, even with modern tech.

Jboat just dropped $2000 total because of a bad plug and wire :eekdrop:

JBoat 06-20-2012 08:08 AM
Not that bad. Most of it was that waste of a scanner that is most likely getting sold. :)

JETDOC 06-20-2012 08:44 AM
The induced misfire test would have shown any dead cylinders

4bus 06-20-2012 09:08 AM
Originally Posted by JETDOC (Post 3713453)
The induced misfire test would have shown any dead cylinders
+1 exactly. He did the test, but at idle :lolhit:

He was about to perform the test last night, but the plugs fixed it :)


All times are GMT -5. The time now is 11:20 PM.
Page 5 of 5
« First
3
4
5
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.