Offshoreonly.com - How do i get these motors fixed

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - How do i get these motors fixed (https://www.offshoreonly.com/forums/general-boating-discussion/278561-how-do-i-get-these-motors-fixed.html)

Jassman

06-13-2012 07:13 AM

How do i get these motors fixed

My partners buddy bought a half dozen Merc 300xs from him several years ago. Two got submerged. Merc does not offer a rebuild service for outboards like they do the race inboards. Any suggestions on how to get these outboards fixed? Thanks Guys.. Jeff

rchevelle71

06-13-2012 07:36 AM

Quote:

Originally Posted by Jassman (Post 3708424)

My partners buddy in Abu Dhabi bought a half dozen Merc 300xs from him several years ago. Two got submerged. Merc does not offer a rebuild service for outboards like they do the race inboards. Any suggestions on how to get these outboards fixed? Thanks Guys.. Jeff

Not sure if he works on opti's(xs), but they are 3 litres, so maybe, Shaun Torrente in Miami is the guy to talk to, I can e-mail you his # if you would like.

Jassman

06-13-2012 07:57 AM

Quote:

Originally Posted by rchevelle71 (Post 3708445)

Not sure if he works on opti's(xs), but they are 3 litres, so maybe, Shaun Torrente in Miami is the guy to talk to, I can e-mail you his # if you would like.

Thanks...I'll check it out. [email protected]

any other suggestions..

C_Spray

06-13-2012 09:50 AM

Flagship Marine in Punta Gorda, FL?: http://www.flagshipengine.com/ (888) 282-2840

budd	06-13-2012 11:29 AM

Dominic, SM marine ft lauderdale

northernoffshore

06-13-2012 11:32 AM

contact brad zastrow he uses bill gohr in illinois.

Maritime_Eng

06-13-2012 11:41 AM

Quote:

Originally Posted by rchevelle71 (Post 3708445)

Not sure if he works on opti's(xs), but they are 3 litres, so maybe, Shaun Torrente in Miami is the guy to talk to, I can e-mail you his # if you would like.

Hi Rick-

Just to let you know that Shaun is working on the 250/300xs's. He is running a set on the back of his skater now (under the 300x cowlings).

Don

weldcrane

06-13-2012 08:20 PM

toni marine in middletown ri merc dealer from day one full blown machine shop they do it all 401-847-6837

Jassman

06-13-2012 09:32 PM

thanks for the help guys..appreciate it. Jeff

All times are GMT -5. The time now is 10:49 AM.