![]() |
Older model Mercruiser 572 CID
I picked up an old Baja as a project boat that has a carb version 572 engine. I need to find out more about the engine, if parts are available, specs for rebuild etc. I would also like to know if there is any amount of "beef" you can do to a Bravo 1 outdrive to hold this engine...I'm being told it may not be possible.
|
fixx
Originally Posted by Tgerber36
(Post 3714711)
I picked up an old Baja as a project boat that has a carb version 572 engine. I need to find out more about the engine, if parts are available, specs for rebuild etc. I would also like to know if there is any amount of "beef" you can do to a Bravo 1 outdrive to hold this engine...I'm being told it may not be possible.
|
I will talk to a friend with them in a 41 Chris craft. I know that He runs the boat once every 2 or 3 years an blows a eng. Try to tell Him old fuel blown eng. He dont use this boat. 20 years 20 hours. It has #5 drivers. What a wast. Artie
|
Originally Posted by mrfixxall
(Post 3715143)
hmmmmm,,thought 540 was the biggest N/A engine they built..are you sure it wasnt a sc engine at one time and they took the blower off?
|
1 Attachment(s)
Get one of these, they usually can be found on ebay.
|
I'm pretty sure the 800sc was 572 cubic inches. Merc also made a 575 hp carbed 540 bulldog back in the late 80's.
|
| All times are GMT -5. The time now is 02:14 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.