Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Merc mechanic North ot Tampa? (https://www.offshoreonly.com/forums/general-boating-discussion/280987-merc-mechanic-north-ot-tampa.html)

PARADOX 07-18-2012 08:49 PM

Merc mechanic North ot Tampa?
 
I need a good Merc racing mechanic (for 525's) near or North of Tampa.
Innovation been working on these but they are just a bit too far and I have very little time. Any service people around New Port Richey? Clearwater? I need to get something done ASAP.
Thx
P

Ryan Beckley 07-19-2012 07:48 AM

Mastry?

PARADOX 07-19-2012 03:53 PM


Originally Posted by Ryan Beckley (Post 3733969)
Mastry?

Mastry? Don't know Mastry.

fountain333 07-19-2012 04:23 PM

There not in north tampa but there people you can trust innovation marine...

Skullkrusher 07-19-2012 05:42 PM

You got Piper Marine in West Tampa or if you can make it to St. Pete, you got Pro Marine at the Statement factory.

PARADOX 07-19-2012 06:19 PM

The problem is, I don't know what needs to be done. All of the sudden the strbrd engine runs rough, dies at idle, spits and sputters and noise, almost whistling sound is evident. I need to read the codes first and see what's going on. Possible valves, rings, or whatever.

PARADOX 07-19-2012 06:22 PM


Originally Posted by fountain333 (Post 3734444)
There not in north tampa but there people you can trust innovation marine...

Thanks. I know Innovation really well and they know my boat.
I'm pressed for time so for now, I want some one closer and check it out.

>>I need a good Merc racing mechanic (for 525's) near or North of Tampa.
Innovation been working on these but they are just a bit too far and I have very little time. Any service people around New Port Richey? Clearwater? I need to get something done ASAP.
Thx
P

dereknkathy 07-20-2012 05:10 AM

your IAC is dead...stuck open.

scarabman 07-20-2012 06:04 AM


Originally Posted by PARADOX (Post 3734539)
The problem is, I don't know what needs to be done. All of the sudden the strbrd engine runs rough, dies at idle, spits and sputters and noise, almost whistling sound is evident. I need to read the codes first and see what's going on. Possible valves, rings, or whatever.

You can read your own codes with an LED and a paper clip jumper. If it is an IAC as suggested, which sounds like a real possibility based on past experience, they are easy enough to change yourself.

Wildman_grafix 07-20-2012 01:01 PM

Is potter to far? I know you would have to drag it over the sky bridge but it's not that bad.

http://www.potterperformance.com/


All times are GMT -5. The time now is 06:34 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.