|
Filling trs for bravo
Questions:
The transon is sound. I understand the step down layering, plug process, but glaswork is a mystory 1.-how far do i cut back from the trs hole(s) both int and ext. To have proper strength and clearence for the bravo i? 2. Do i use epoxy or cloth/resin between layer - if cloth what type. 3 can i use a pre-made glass panel to match ext glass thickness and blend the joint for paint or do i lay up multiple layers of glass/resin. 4. Where can i get a bravo i cut out template. Thanks for any help. |
PM sent, got the message the other day but forgot to re was on my droid phone
|
Originally Posted by JETTDOGG
(Post 3737837)
Questions:
The transon is sound. I understand the step down layering, plug process, but glaswork is a mystory 1.-how far do i cut back from the trs hole(s) both int and ext. To have proper strength and clearence for the bravo i? 2. Do i use epoxy or cloth/resin between layer - if cloth what type. 3 can i use a pre-made glass panel to match ext glass thickness and blend the joint for paint or do i lay up multiple layers of glass/resin. 4. Where can i get a bravo i cut out template. Thanks for any help. Dont know if intersted buy i have a couple of plates we made to go from trs to bravo woithoout messing around with glass email me if intersted [email protected] |
| All times are GMT -5. The time now is 09:02 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.