Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   looking for 454 mag upgrades or maybe new motor (https://www.offshoreonly.com/forums/general-boating-discussion/282477-looking-454-mag-upgrades-maybe-new-motor.html)

daniel475 08-09-2012 12:29 PM

looking for 454 mag upgrades or maybe new motor
 
was curious what i could do to get a little more horsepower out of this motor? if this would be the way to go? or look for another motor that i could drop in .. any help would be great thanks alot, motor has 600 hours on it , no smoke , doesnt burn any oil , just looking for a winter project

Stormrider 08-09-2012 12:50 PM

I had a 454 bored 30 over, balanced crank, new cam, new head, new intake, new everything.
Dyno'd 560hp and has been running for years.
Don't forget you'll need a new exhuast.

daniel475 08-09-2012 01:12 PM

hey
 
anyway to keep the silent choice option? kind of nice it doesnt have to be loud all the time haha , what was the cost on doing all of this ? and what parts did you use .. next question what will the bravo one leg handle?

RIPJIVE9311 08-09-2012 02:29 PM

I had one in my old Carerra and it had thru the prop exhaust and I could get 4200rpm out of it and I put on,Holley750,eddelbrock performer manifold,MSD ignition system,roller rockers,highflo sparkarrestor and ran the exhaust out the transom with stock manifolds and I picked up almost 400rpm and it ran like an injected motor,I would have got more with better exhaust but sold it before I did that and I had about the same hours when I did that and ran it up to almost 800 hrs with no problems.Those are great motors and respond well to mods.These parts are a good start without going into the bottom end and are all reasonably easy to install.You can just go to a mail order house like CP performance and get all parts from them.Have fun,I did.

Stormrider 08-09-2012 02:33 PM


Originally Posted by daniel475 (Post 3750025)
anyway to keep the silent choice option? kind of nice it doesnt have to be loud all the time haha , what was the cost on doing all of this ? and what parts did you use .. next question what will the bravo one leg handle?

Had to run 93 octane.
Don't know the parts, was built by JC Performance.
IIRC, it must have been 5000+exhaust?
cant really remember, and try not to... :lolhit:

daniel475 08-09-2012 03:52 PM

hey
 
haha thanks alot , ya its efi ... i may look for a complete motor and just keep this one on the shelf, or supercharge it not sure yet winter is coming soon

Stormrider 08-10-2012 08:53 AM

You are better off building/buying an HP engine, and keeping your stocker for when its time to sell.
Or even have a backup just in case.

Not a bad piece... especially if it comes w/ the exhaust.
http://www.offshoreonly.com/classifi...o46889-en.html

soldier4402 08-10-2012 09:03 AM

theres some nay sayers but a lot of guys have had luck with blowers.


All times are GMT -5. The time now is 01:52 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.