Offshoreonly.com - Mti 42 cc

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Mti 42 cc (https://www.offshoreonly.com/forums/general-boating-discussion/283775-mti-42-cc.html)

Already orders for it! That is great.

Somebody, please put trip 557's on that puppy.

Quote:

Originally Posted by keith atlanta (Post 3766037)

...somebody, please put trip 557's on that puppy.

Quote:

Originally Posted by pstorti (Post 3765971)

"The patented hull design clearly works—as any turns we took in the boat were effortless and agile. And while the boat has an 11-foot beam and weighs in the neighborhood of 13,000 pounds, it felt the opposite of large and heavy. In fact, it was quite nimble and efficient. We were averaging a little more than 3 mpg during our brief outing. And that’s on the hull plug."

Jason care to explain this a little better?? was this a bare hull with no deck, liner, top or hardware? kind of seems impossible with quad verados you would have to be doing 120mph at 4000 rpm or something close.

Yeah the boat was a complete boat—it was just a prototype with a deck that was actually spliced together from one of the company's catamaran decks. It did have a very heavy fiberglass/bondo t-top (Randy Scism said it weighed about 450 lbs while the real one will only weigh 150), plus the cockpit seats, lounges, a cabin and a full wraparound bench in the back. Basically it was dressed up... just far from what the finished product will look like.

Quote:

Originally Posted by black thunder 46 (Post 3765930)

No that's just a wrap the boat went back to the factory to be redone the hurryed up to get it done for the shootout when they are done redoing it it will be going to the new owner at loto I don't want to say his name yet idk if it's a secrete or not?
Brett

Bob Bull?