Can a Mirage (non plus) prop be converted to solid hub?
Is there anybody that can convert a standard Mirage (non Plus) prop to a solid hub? If so, can you let me know who can do it?
Thanks |
fixx
Originally Posted by JackLS1R1
(Post 3779797)
Is there anybody that can convert a standard Mirage (non Plus) prop to a solid hub? If so, can you let me know who can do it?
Thanks http://www.wholesalemarine.com/p/835...835258K-2.html |
I am running mirages with solid hubs.
John jr |
you have to weld in a solid hub, I was looking for used Mirages and I found a few of the old style with the solid hub. Why do you need it?
|
Thanks for the replys. I think I may need it welded.... This prop I have has a round style hub (not square like that torque flight, I have that set-up on another prop).
So I guess I am looking for a round style solid hub for a mirage prop. |
What pitch and rotation? I have a few laying around that are solid.
|
The prop I have that is in question is a Mirage 3 blade 25P standard rotation (single engine).
My engine makes 610 HP. I normally run a 4 blade with the solid hub and its great. I was also given this 3 blade with the boat, but it has a regular Rubber/Nylon hub and spins when you get on it hard. Thanks |
I have soild hub mirage non plus 25p rh for 325 if you have any interest?
|
Originally Posted by tobbersbid
(Post 3781192)
I have soild hub mirage non plus 25p rh for 325 if you have any interest?
|
All times are GMT -5. The time now is 05:42 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.