Anybody with power sitting in your garage this 47 outerlimits gtx might be for you
#62
Registered
Thread Starter
Join Date: Mar 2006
Location: Chicago, IL
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
And here are headers that will work....and look they are Joey's (a good friend of ours/fellow Chicago boater) and they're $6,500........hell all I need now is a driveline and tranny and can stick my own power in there...but will have to bump up to a bigger blower.
Last edited by Kool-Aid Man; 11-27-2012 at 11:20 AM.
#63
Registered
#64
Registered
Thread Starter
Join Date: Mar 2006
Location: Chicago, IL
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
#67
Registered
Thread Starter
Join Date: Mar 2006
Location: Chicago, IL
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
Yes I do when I was cleaning it out before it went to Mitcher T's..the sea strainer are out as well because I planned on replacing....just like right now I'm replacing the trim pump hoses so you won't see them either.....the hatch is off in that pic so you'll see the rams on the sides and everything is somewhat pull up and to the sides because I was cleaning it.
Boats in Michigan...I'm in Chicago but I'm showing it Thursday so I'll get some pics then and post.
Boats in Michigan...I'm in Chicago but I'm showing it Thursday so I'll get some pics then and post.
#68
Registered
Join Date: Oct 2012
Location: 65065, MO
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Rigging price
A little off on the numbers if you are buying new. If you are going used, then you are pretty close.
1000+ hp engines (new) -$50,000-$100,00 each depending on what you get and who built it.
Bam drysump trannys(new)-5K each
Big tube Headers (new)-6K-7K each
Props (new)-9K-10k
Rigging and driveline prices are good.
Im certainly not dogging it. It's a gorgeous boat for a very good price. Wish I could swing it.
Good luck.
Eddie
1000+ hp engines (new) -$50,000-$100,00 each depending on what you get and who built it.
Bam drysump trannys(new)-5K each
Big tube Headers (new)-6K-7K each
Props (new)-9K-10k
Rigging and driveline prices are good.
Im certainly not dogging it. It's a gorgeous boat for a very good price. Wish I could swing it.
Good luck.
Eddie
#70
Registered
I just put a quote together for another project. It is a complete rigging of the engine compartment. That includes 4 strainers (2 for the engine, 2 for the intercoolers), all of their rigging (SS 1 1/4" ball valves, SS 1 1/4" fittings, all new hoses, etc), cool custom made billet flushing attachment, SS water dumps, SS water pickups, new fuel pumps, billet SS filter heads, all new fuel plumbing in AN hoses, replacing a few steering hoses, installing extension boxes, gimbles, drives, sc engines, etc. and it's only 15K in parts and labor. That doesn't include the purchase price of the boxes, gimbles, drives or engines, but it does include their installation and rigging. All the other parts mentioned are included in that price.That includes a ton of big SS fittings, a ton of black anodized AN fittings, well over 100 total feet of hose, the 4 strainers (they are over 3K alone),complete fuel system from tank to engine, rigging supplies, nuts,bolts, washers, etc. etc. etc.
So, to answer your question, yes I would do it for that.
Eddie