fuel injectors.
 

Where to send injectors to be cleaned, checked and flow tested.

Injector RX, Houston, TX, I sent two sets to them turn around time was quick.

I've had good luck with RC Engineering

http://www.rceng.com

Bigmc69
I do them at my shop. Sonic clean, back flush, new filters, printle caps, spacers and o-rings. We then flow them and run them through a battery of tests and mark them with flow values. Cost is 20.00 per injector

Marren Fuel Injection in CT. www.injector.com. Fuel Injection is Tim's only business. Does FI in Grand Am, NASCAR Cup as well as boats, bikes etc... Does all our stuff.

Rich
Joker Powerboats/CRC 611

Marren is the place to go. I send all of my injectors there. Can't say enough about them. They get it done. Great people.
Eddie

Bam marine
 

I did mine at BAM

http://www.offshoreonly.com/forums/g...injectors.html

Did you run your boat yet??
From the thread, I assume your going to do the other engine just in case!!

Fuel injector Testing, cleaning--flowing
 

Here is a video of one of our systems. We charge $100 for a set of 8 for all services. If they require new filters, they are $5 each more. Check out the video!! thanks http://www.youtube.com/watch?v=mCnI7...RrpASWV1WzIcbA