Precision Marine la
12-18-2012, 09:01 PM
#1
Registered
Thread Starter
Precision Marine la
Has anyone here had there engines built there and dynoed. Do they stand behind the work they do? Looking for some feed back on there work.
Thanks
Thanks
12-18-2012, 09:06 PM
#2
Mark is one of 2 guys in the U.S. that I would have any kind of work done on my motors. Mark did the tune on my motors. I crated them up in Chicago, sent them down and got them back, put them in the boat and they run perfect. The tune is right and he got 50 more HP than I expected. He asks a lot of questions about your setup, so be prepared to answer him.
As you can see below, I personally endorse him.
The other guy I would have no problem recommending is Eddie Young at Young performance. He is very good also.
Good Luck.
Smitty
As you can see below, I personally endorse him.
The other guy I would have no problem recommending is Eddie Young at Young performance. He is very good also.
Good Luck.
Smitty
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
12-18-2012, 09:12 PM
#3
Platinum Member
Platinum Member
Join Date: May 2003
Location: Metairie, La.
Posts: 667
Likes: 0
Received 0 Likes
on
0 Posts
I have had them do all of my major engine work and have had nothing but good things to say.
If you are looking for a great EFI motor they can do it. When you get your motor and their dyno says it made XXXXhp you can bet it did, and will when it's back in the boat.
If you are looking for a great EFI motor they can do it. When you get your motor and their dyno says it made XXXXhp you can bet it did, and will when it's back in the boat.
12-19-2012, 07:55 AM
#6
21 and 42 footers
Platinum Member
Mark tuned a highly modified 500efi for me a few years back. Had a minor issue right when ethanol hit our market. Mark still stood behind what was done and took care of the problem.
12-19-2012, 08:25 AM
#7
Registered
Join Date: Aug 2006
Location: Dallas Ga
Posts: 1,126
Likes: 0
Received 0 Likes
on
0 Posts
Mark is doing my motor right now. He is the best and that is why it is there. Your biggest problem is going to be getting him to do the work, last time I looked he was booked thru the winter. He is a very popular man and deserves all the credit he gets.
12-19-2012, 09:27 AM
#8
Registered
Join Date: Apr 2006
Location: Grand Lake (E-Dock Junior Varsity)
Posts: 3,017
Likes: 0
Received 2 Likes
on
2 Posts
I agree with what Smitty said. He's one of two people in the industry I would trust with my hard-earned cash to deliver a product that was up to my expectations!
12-19-2012, 10:52 AM
#10
VIP Member
They are honest and great guys, Ive dynoed my motors 6 different times there,With the new work load they hired a new manhinest thats one of the best,Im taking all my machine shop work to them from now on. I was there a few weeks ago picking up a new Dart block, they must of had 12 sets of 1075's getting rebuilt,Ive never seen so many in one place
Rob
http://www.offshoreonly.com/forums/g...-build-up.htmc
[YOUTUBE]http://www.youtube.com/watch?v=YfV1jsGCj8s&feature=share&list=PL3714CB5FD 51F7EE2[/YOUTUBE]
Rob
http://www.offshoreonly.com/forums/g...-build-up.htmc
[YOUTUBE]http://www.youtube.com/watch?v=YfV1jsGCj8s&feature=share&list=PL3714CB5FD 51F7EE2[/YOUTUBE]
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
Last edited by Strip Poker 388; 12-19-2012 at 12:05 PM.
