Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Ron Sporl performance marine (https://www.offshoreonly.com/forums/general-boating-discussion/294314-ron-sporl-performance-marine.html)

gnorthga 04-09-2013 10:45 AM

Ron Sporl performance marine
 
Ron Sporl performance

I can't say enough about this mans business and his wonderful wife sandy who does so much for the customer service end of the business

Any problem I have with my boat, motors or trailer they are always ready and willing to solve my problem

I have tried to break his motors and they are well put together and go a long way before needing refresh

Ron thank you and sandy for another project well done and on time

dykstra 04-09-2013 11:19 AM

Great to hear!!!

looseconnection 04-09-2013 11:23 AM

Does he work only out of La or does he still have a shop in Al?

I have heard good things about him, that he does a good job for a fair price.

LC

mbones 04-09-2013 07:29 PM

His shop is still located in AL right now he has been there since hurricane Katrina
He built both my Merc 500
zero issues since they were done

Mykalvballer 04-09-2013 08:00 PM

I just had a ton of things done with Ron this past month. He was on top of things and I have no more issues,,,,,thanks Ron

looseconnection 04-09-2013 08:43 PM

Mykalv

Do you boat down in orange beach. I think new years eve 2011we were running down the icw next to one another?

gofastlvr 04-10-2013 09:05 AM


Originally Posted by gnorthga (Post 3901959)
Ron Sporl performance

I can't say enough about this mans business and his wonderful wife sandy who does so much for the customer service end of the business

Any problem I have with my boat, motors or trailer they are always ready and willing to solve my problem

I have tried to break his motors and they are well put together and go a long way before needing refresh

Ron thank you and sandy for another project well done and on time

Now Gerald... I don't care how well he puts his motors together, you can still scatter one with the best of 'em!

Me being solidly in that same category:lolhit:

Bullhead 04-10-2013 12:13 PM

Ron is a great guy....he let me and one of my buddies crash at his condo in Destin one night when we showed up for the poker run and hadn't booked a room for that night....the really cool thing is I had never met Ron, we just had mutual friends and he treated me like I was his best customer

WildThing47 04-10-2013 03:06 PM

Had the pleasure of meeting Ron in Key West, just a all around great guy, have heard nothing but good things about his motors and business.

gnorthga 04-10-2013 09:14 PM


Originally Posted by gofastlvr (Post 3902551)
Now Gerald... I don't care how well he puts his motors together, you can still scatter one with the best of 'em!

Me being solidly in that same category:lolhit:

I am telling you the truth

I have tried hard to break one of his motors but no luck

I can tell you about a guy up close the old/fountain factory that will take your money and half way do the job and the motors last about 50 hours and he charges as much as Ron he is way over the hill and needs to retire

but I dont think I should do that on a open form


All times are GMT -5. The time now is 01:20 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.