2 - Piece full boat cover
 

Lookin for pics of this type of cover that incorporates a cockpit cover with a seperate bow cover that snaps on. Only used for slipping purposes of course. Although the boat is only 25 ft, messing with a full sunbrella cover on the lift is a pain in the keester. I know it will be custom fit, but just looking for ideas.

Thanks,
Paul

I have a full Aqualon cover made by Phil's Custom Canvas out of Lake Ozark, MO. that I cover my boat with in my slip. My overall boat length is something like 27'8". The cover is not at all cumbersome to handle. My buddy who slips behind me had a 2 piece sunbrella cover like you describe on his 303 Formula. After seeing my cover he had Phil make him a full one-piece cover just like mine.

As for pics, most every closed bow 288 and 32 that Sunsation made had the cover setup you desire. You should find plenty of pics on their site.

get a full cover you will be better off it is not that hard to put on, start at the bow and work back you can walk on the sunpad even with the cover on. I had a full cover on my 28 Daytona, my current boat is a two piece but it is a 37' center console.

Paul, Let me dig through some pictures i know I have some of mine somewhere. i like the 2 pieces like you said to heavy as one piece

Mark

My bow cover is integrated to fit with my cockpit cover. The bow cover has a line that snugs it tight below the rub rail and then snaps to the cockpit male snaps. The bow cover has a dual type snap and the cockpit cover then snaps onto them.

Hay I have a two peice cover on my 30 skater love it will show pics when I can

Mine uses male/female stacker snaps to connect the bow cover to the fairng and then the cockpit cover snaps on top of the bow cover so it overlaps.
http://www.mcmaster.com/#button-snaps/=mgo1we

Thanks for the replies. Two piece cover it is.