When you get the boat let me know we will meet in put in bay for a cold one. Kinda of funny I will be on my 42 fountain the 39 cc is staying at the plant for the summer getting a little tune up.

Few older and a few last week! Motors are not **** to hang and hook up! They should be fine.

Was this build started from scratch after the miami show this year or was the hull already out of the mold. Thats a pretty fast build if they started end of February.

.

This boat is hot, good luck and do send us update pics as often as you can!

.

Bill, we will do that!

Here's a few new photos for you to enjoy! But, not as much as me!

We have been looking into a new 34. Can you tell me how the dual DTS throttle/shifters are set up with the trips. My guess is you will run on the "single lever" setting mostly and run all 3 off one lever. Then use the second lever for the starboard engine when docking. I just assumed 3 engines would get 3 levers. Also, did you get trip bolster seating at the helm? The ones I've seen all have the steering in the middle with trip seating. I was thinking that I may like the steering to be on one side or the other. I even thought of going to twin seating. Thanks.

Punkazz traitor!!!!:evilb:

Mercury DTS only comes with two levers. The right hand controls the starboard and center. You can get Livorsi DTS if you want three throttles and three shifters.
Chris went with the port side steer option vs the center steer. He has two wide seats with an armrest in between. You can build the boat either way.
When do you want yours?

Thanks Terry. Can you please post some pics of the wide seats when you have a chance, or text me with them. Do you build many with the 2 wides seats vs the triple seats? Just wondering how popular it would be. I'm waiting for the 39 to come in to Randy to see just how much my wife likes that "L" shape back seat.