Offshoreonly.com - Avanti progress

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Avanti progress (https://www.offshoreonly.com/forums/general-boating-discussion/295670-avanti-progress.html)

The boats buffed with heavy compound, start on the medium tomorrow, its cleaning up nice. The motor is here, though it has a red bellhousing thats definitly not merc, Im thinking volvo. Also no coupler. Luckily I have a merc bellhousing and coupler on the shelf. Motor aslo came with the freeze plugs removed, cant really figure that one out. Its really clean though, no corrosion, no gunk and no repainting. Its getting dropped in next thursday and hope to have it lit off by next weekend.

one setback, on closer examination, the front bolsters have a bad case of rotten wood shells though the covers are ok. So I am going to try and surgically deconstruct them, build new shells and stick them back together.

From what I have figured out the motor has been sitting for a few years, 454 lx mpi. Anything to do/look out for before/during first firing??

It had a bad case of bottom funk that laughed at the pressure washer/scrub brush. Using Goof Off rust stain remover and its cleaning up nice and easy. Muck better than I rhought it would.

I hope to be running with the bugs worked out by june 1st.

Hopefully this is the easy project, as soon as Im done with this its on to the 26 bertram. Damn alcohol fuel at up the fiberglass tank so some major surgery is in the works.

Pics, We need pics!!!

:worthless_without_p

No really would love to see the progress!

From one AVANTI owner to another,, WE NEED PIX. :)

Thought it was a o/b conversion project?

Post pictures of the progress.

Ill be launching my Avanti around the end of May as well. Do you ever boat on lake eire near cleveland?

Nice looking boat!!!

Nice work Phragle! Keep it up!

Quote:

Originally Posted by sommerfliesby (Post 3922047)

nice work phragle! Keep it up!

She really cleaned up great from your other photos. It looks great! You plan on racing if I remember correctly?

^^^ that's what I was curious about. Not at all trying to start $hit, but I thought this was going to be a class 7 sob? Obviously plans have changed. Or is class 7 allowing 17-22' with I/0 now?

Looking good. I'd change those riser gaskets out. Looks like the port one has been weeping on the outside so most likely would be leaking on the inside as well.