Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Mercruiser grease heads up (https://www.offshoreonly.com/forums/general-boating-discussion/297438-mercruiser-grease-heads-up.html)

FIXX 06-02-2013 07:15 PM

Mercruiser grease heads up
 
mercruiser /quicksilver is no longer producing 101 Teflon grease ,,Enging coupler spline grease part # 92-802869 q-1,,,ujoint gimbal bearing grease part #92-802867q-1.....Its all being replaced by mercury/quicksilver Extreme grease which i dont have a clue what it consists of...

So stock up!

the deep 06-02-2013 07:40 PM

This is what I use . AMSOIL DOMINATOR Synthetic Racing Grease

rfgonzo 06-02-2013 07:47 PM

I got a case of 101 about three years ago, Should last me a life time LOL. I was at West Marine last week getting oil but I did notice they had 101 in stock.

bowtie 06-02-2013 08:38 PM

I use 101 on everything, great waterproof grease, but it's about time they did this. Back when I started working on Mercs there was only one grease, multi purpose. We used it on everything. Now there's a different grease for everything, prop shaft, gimbal bearing, spline ect.

J-Bonz 06-02-2013 09:55 PM

Thanks for the heads up! I love that stuff! I will definitely have to stock up or pm Gonzo when I need some. I wonder what they will suggest to use when rebuilding drives. Its been some time but I remember the manual calling for a mixture of 101 & High Perf Gear lube when installing some bearings.... Could have been bravo instructions.......
Jr.

28 V 06-03-2013 06:18 PM

Thanks for letting us know Mr Fixx...seems like the 101 is completely different from the "blue" family of grease(s).
I just received a Merc circulator inlet hose made in China and a fuel pump made in Korea (south)..so I suppose this is all just progress ;).

Clustergear 06-03-2013 09:06 PM

Mercury spring stock order showed that 101 would no longer be available after stock ran out. Called Mercury and they said that 2 4 C should be used in place of 101. Order three cases and took every tube in store and squirreled it away.

pstorti 06-04-2013 05:19 AM

what kind of maintenance does a bravo gimbal need and how often? I change my drive oil every 50 hrs but I haven't done anything to the gimbal since I had the motors out last winter (18 months ago)

Robertjr 06-04-2013 05:39 AM

Darn!, 101 is excellent for prop shafts. Really like that stuff. Wonder who really makes it? Or a close equal?............................................ ..Rjr..........................................

07DominatorSS 06-04-2013 08:28 PM


Originally Posted by the deep (Post 3935790)

Doesn't get any better than this!


All times are GMT -5. The time now is 08:25 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.