Offshoreonly.com - Alpha gen 2 shimming question

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Alpha gen 2 shimming question (https://www.offshoreonly.com/forums/general-boating-discussion/298545-alpha-gen-2-shimming-question.html)

jbizub5192

06-21-2013 10:57 AM

Alpha gen 2 shimming question

Do I need to redo/check the shimming of the upper gears? I just replaced the yoke and oil seal. The bearings are all the same. Thanks

Panther

06-21-2013 02:50 PM

If all you did was replace the yoke shaft and seal with all the bearings and gears being the same you don't need to re-shim.

jbizub5192

06-21-2013 11:00 PM

Ok thanks, thats the answer I was hopping for. When do you typical need to re-shim, only when you replace gears/bearings?

pi75	06-22-2013 09:33 AM

You do need to set the Rolling Torque tho.

All times are GMT -5. The time now is 03:51 AM.