Bravo 3 speed
What is the fastest that you have heard of a single engine Bravo 3 boat running? Mercury says that the hydrostatic drag tops it out at about 65 mph.
See you all at the Shootout! |
SeaRay Jim has a 240 Sundeck with a 540 running over 65 MPH.
http://www.offshoreonly.com/forums/p...rop-set-5.html Clay Washington had a 22' Crownline with a Whippled 502 and a Bravo III. I think he was running around 70 MPH. Maybe he will chime in. |
Bob Lloyd built both Jim's and Clays motors. He should know pretty close the top end of a B3.
|
Originally Posted by CrownHawg
(Post 3969898)
Bob Lloyd built both Jim's and Clays motors. He should know pretty close the top end of a B3.
|
I'm pretty sure Jim uses a standard prop (not sure of pitch). Not sure about Clay, that was several years ago. I had a Volvo DP, w/496 and ran around 65 with F8s.
|
The DPX seems to overall be faster than the B3. The props on the two are very different. We are attempting to push the B3 as much as we can, as the prop torque with a Bravo 1 makes for a crazy ride in rough waters and hard turns.
|
Mercruiser use to recommend Bravo III speeds up to 70 mph. Currently they backed that down to 65 mph. We just sold a 23 ft Crownline Mercruiser w / Bravo III that does 65 mph on gps and handles good. Bravo III apps do not like to be way over trimmed, trim range is limited compared to single prop app.. Aft prop can brake loose when over trimmed
|
Originally Posted by 36Tango
(Post 3969902)
What props were used in order to get there? Standard props or something special? Pitch and gear ratio?
|
Originally Posted by 36Tango
(Post 3970030)
The DPX seems to overall be faster than the B3. The props on the two are very different. We are attempting to push the B3 as much as we can, as the prop torque with a Bravo 1 makes for a crazy ride in rough waters and hard turns.
|
My 23 stingray loved trim, had to use the trailer button to get to 64
|
All times are GMT -5. The time now is 08:55 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.