Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Warlock Tunnel Hull Question (https://www.offshoreonly.com/forums/general-boating-discussion/303135-warlock-tunnel-hull-question.html)

the deep 09-19-2013 12:58 PM

Why the knowledge hoarding . Can someone tell me where this hull design originated . Splash or otherwise . http://i1243.photobucket.com/albums/...deep/whaat.gif

JRider 09-19-2013 01:19 PM

A lot of the west coast hulls were copied from Talons with a different top cap. The little wing you ask about kinda looks cool but it may also function to stiffen the center pod connection to the sponson.

the deep 09-19-2013 01:45 PM


Originally Posted by JRider (Post 3998751)
A lot of the west coast hulls were copied from Talons with a different top cap. The little wing you ask about kinda looks cool but it may also function to stiffen the center pod connection to the sponson.

That's kinda what I was thinking that it was there to make that connection stronger plus had another function . Wish an expert would chime in that knows for sure . Copy of a Talon hull , maybe that's what has people pizzed off . I have asked questions before about this hull and got crickets . Thanks for the information JRider it is appreciated .

JRider 09-19-2013 02:17 PM

Performance boats.com would be a better place to ask that question as they have more info on the west coast boats.

bulletbob 09-19-2013 02:36 PM

Deep, I'm almost positive it a copy of a Talon with some subtle changes. I have a Talon and my friend has an American Offshore. The top caps are diffrent ,but, the bottoms are "almost" identical. Mine is laided up heavy. It looks the same as yours under the bow. I have seen variations in center pod depth with other brands. Hope this helps.

CLA 09-19-2013 02:43 PM

My 1997 WPM had the same thing in the tunnel. I always thought it had something to do with holding in air. Call Tom and ask him. Him and his brother built them.

CLA 09-19-2013 02:48 PM


Originally Posted by the deep (Post 3998417)
Anti stuffing device , good idea . I wonder why no one else uses that design . Would these cause the hull to become unstable at a given high speed , looks like they would create lift and not only upon stuffing . The boat currently runs 83gps as if on rails .

Mine ran around 95 or so with the first motor and 100-103 on the pump gas tune and 106 giver or take on race gas tune. It was never unstable, infact if was a heavy F'ing tank! I joked with my engine builder once that you would have to build a pro mod
motor to get one to 120mph.

Build you a motor and get that SOB running!

the deep 09-19-2013 03:10 PM


Originally Posted by CLA (Post 3998830)

Build you a motor and get that SOB running!

That is the plan my friend . Thanks guys for the information .

SVL-WARLOCK 09-19-2013 07:23 PM

Sam

I will put a call into lance. Not sure if it was a talon copy. The bottom is different. Different strake placement. And diff step placement. The WPM is the same bottom. I think Tom kept a Mold and builds it under WPM. I will let you know Lance says.

SVL-WARLOCK 09-19-2013 07:27 PM

Yours is a little lighter than the older ones. It's strong as ****. Not many boats would have taken the abuse it has and look so good. How many boats barrel roll at 80 and have no damage what so ever.


All times are GMT -5. The time now is 05:17 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.