|
Do glass work?
It only needs a little ;D
http://bit.ly/14nzRye eBay item 141066866418 http://i38.photobucket.com/albums/e1...ps9568d2ce.jpg http://i38.photobucket.com/albums/e1...pse875bca8.jpg |
Just duct tape it
|
Somebody went crazy with the sawzall.
|
definitely epoxy for that repair :D . . .
(it is certainly repairable to :D) |
2 cans of Flex Seal should do the trick..... https://www.tryflexseal.com/
Obviously I would never be a good theif. I could never bring myself to cutting the back end of a boat off, with a saws-all, to steal the motors and drives... |
I bet that the thief sawed it because the lacked the ability or the "chop shop" did not have the ceiling height to pull the motors how one would traditionally do it.. Allot easier to roll the motors out with the hull on the ground and cut just in front of them.
Focking criminals! Unbelievable........ |
Originally Posted by low_psi
(Post 3998876)
2 cans of Flex Seal should do the trick..... https://www.tryflexseal.com/
Obviously I would never be a good theif. I could never bring myself to cutting the back end of a boat off, with a saws-all, to steal the motors and drives... |
34' Hustler For Sale
Must be sold! (Some rigging required) |
I thought maybe it was from a bad divorce-judge ordered owner to split boat with his wife!!!!!!!!
|
He was going to add a step.
|
Couple of butterfly band aids and set off to sea!
|
5200 to the rescue!!!!
|
1 Attachment(s)
:party-smiley-004:
[ATTACH=CONFIG]508301[/ATTACH] |
2 Attachment(s)
[ATTACH=CONFIG]508305[/ATTACH][ATTACH=CONFIG]508304[/ATTACH]
This may work................. |
its missing the engines the addy reads but if you follow his other items http://www.ebay.com/itm/572-Mercruis...s_Gear&vxp=mtr
|
Loose the part that was cut , Add a new transom and throw a couple of outboards on it . Problem solved ! You'll have a 30' outboard Hustler
|
Looking at the pics again, you could jack up the back end a couple inches; fill in the bottom with some JB Waterweld, and you'd have a one of a kind 40 Hustler step-bottom. :drink:
|
Originally Posted by FIXX
(Post 3999100)
its missing the engines the addy reads but if you follow his other items http://www.ebay.com/itm/572-Mercruis...s_Gear&vxp=mtr
|
Our old "top Cat" Spectre was stolen and cut the same way
|
All that and all they took was the motors and drives? I see a lot of decent rigging items there
|
Originally Posted by FIXX
(Post 3999100)
its missing the engines the addy reads but if you follow his other items http://www.ebay.com/itm/572-Mercruis...s_Gear&vxp=mtr
|
Originally Posted by SHAWN DAVIS
(Post 3999178)
Our old "top Cat" Spectre was stolen and cut the same way
|
Is this one that didn't make it to the chipper?
|
| All times are GMT -5. The time now is 03:45 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.