Offshoreonly.com - Kurt's Marine-50 Cal Engines

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Kurt's Marine-50 Cal Engines (https://www.offshoreonly.com/forums/general-boating-discussion/305293-kurts-marine-50-cal-engines.html)

hogie roll

11-15-2013 11:07 AM

Quote:

Originally Posted by stirling (Post 4027482)

I have a pair of his engines too , Olds DRCE Ali motors,EPD heads, 675 Ci N/A ,and like to get some info from people who had /have them too .

In a boat?

stirling

11-15-2013 11:17 AM

Not at the moment ,I bought them out of a Hydratech race cat ,but yes they are Bandit racing engines ,Marine engines

hogie roll

11-15-2013 11:33 AM

Quote:

Originally Posted by stirling (Post 4027505)

Not at the moment ,I bought them out of a Hydratech race cat ,but yes they are Bandit racing engines ,Marine engines

Cool. 4.9" bore spacing? Custom headers? Any pics?

stirling

11-15-2013 11:47 AM

I don,t think it has 4,9 "bore space ,this is a Ali DRCE1 ,thought those were 4,840 but not 100% sure about that ,headers are Stellings big tube ,but are old and leaky ,so I,m replacing those for CMI top split ,were I use the manifold only ,and made the upper unit with a true merge collector .
The engine were now doing is going to go on the dyno within a few months I hope .

I can ,t post pics in this section due to registered only

All times are GMT -5. The time now is 01:30 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page