|
Would this engine fit in your boat?
2 Attachment(s)
Harold Grady ...Built right.
[ATTACH=CONFIG]512817[/ATTACH][ATTACH=CONFIG]512816[/ATTACH] priced to sell - http://www.offshoreonly.com/classifi...o54637-en.html |
Originally Posted by MissGeicoRacing
(Post 4030204)
Harold Grady ...Built right.
[ATTACH=CONFIG]512817[/ATTACH][ATTACH=CONFIG]512816[/ATTACH] http://www.offshoreonly.com/classifi...o54637-en.html |
I need three of them, and I will make them fit!
|
with a few slight modifications!
|
Bolt right in mine just don't fit my budget lol I am 100% willing to paint her geico green!
|
Originally Posted by lil red
(Post 4030217)
Bolt right in mine just don't fit my budget lol I am 100% willing to paint her geico green!
|
Yup, but I would need two of them. I would be happy to provide a charitable donation receipt for the generous contibution to my boat.
Thanks in advance . Rick G. |
It amazes me what we are able to do these days with engines. I mean somewhere underneath all that is a block and heads right? Almost like there is more bolt on stuff then actual engine :D
way cool :cool: |
Won't even fit in my garage.
|
Hell, I tried to just count the billet pullies on the front and ran out of fingers..
|
It would work up till the point where my outdrive explodes!
|
YES! I just need to find a way for it to run two outdrives!
|
Will this fit in my Bayliner, might have to upgrade the alpha. :lolhit: I guess money can solve some problems.
|
Originally Posted by glassdave
(Post 4030234)
It amazes me what we are able to do these days with engines. I mean somewhere underneath all that is a block and heads right? Almost like there is more bolt on stuff then actual engine :D
way cool :cool: |
Originally Posted by MissGeicoRacing
(Post 4030204)
Harold Grady ...Built right.
[ATTACH=CONFIG]512817[/ATTACH][ATTACH=CONFIG]512816[/ATTACH] priced to sell - http://www.offshoreonly.com/classifi...o54637-en.html Jon |
Originally Posted by glassdave
(Post 4030234)
It amazes me what we are able to do these days with engines. I mean somewhere underneath all that is a block and heads right? Almost like there is more bolt on stuff then actual engine :D
way cool :cool: |
I wonder how fast my 18ft Formula would go with that.
|
I can make it fit.....but I think once the hole is cut in the hull the boat's prolly gonna sink!!!!:lolhit:
|
looking at it makes me depressed.......
|
Even free I couldn't afford to feed it or maintain it.
|
fit in the boat sure! but i dont think it would run with all of my drool shorting out all of the electronics...
|
If I could afford it, she would be just a sawzall away from fitting! Then I would have my friends over so we can drink beers and stare at it cause I sure as hell wouldn't be able to afford the gas!
|
Bolt in with a little cut in the hood
1 Attachment(s)
Originally Posted by MissGeicoRacing
(Post 4030204)
Harold Grady ...Built right.
[ATTACH=CONFIG]512817[/ATTACH][ATTACH=CONFIG]512816[/ATTACH] priced to sell - http://www.offshoreonly.com/classifi...o54637-en.html |
Tried to put a picture on my 2500 hd but it didn't work. LOL
|
45k takes her. The new owner can be present for the first dyno pulls. Also, ECU can be set to fit a wide range of power settings/rpm to fit your needs 1100-1400hp.
|
I'd make em fit! Somehow! Twin scoops I don't care! Haha
|
Not getting a damn thing done here in my office daydreaming about how fast my old flat bottom 42 Fountain would run with three of those even "detuned" to 1100hp. Forget for a few minutes that the Bravos would explode...........and I ponder what it would be like just once!
|
Originally Posted by 1000 islander
(Post 4030678)
Not getting a damn thing done here in my office daydreaming about how fast my old flat bottom 42 Fountain would run with three of those even "detuned" to 1100hp. Forget for a few minutes that the Bravos would explode...........and I ponder what it would be like just once!
|
Originally Posted by ICDEDPPL
(Post 4030241)
YES! I just need to find a way for it to run two outdrives!
Imco also made some and a few others |
| All times are GMT -5. The time now is 02:53 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.