Engine builders in the Detroit area?
 

Looks like I have a rear main seal leak on my 400sbc that only has 70hrs. Any shops in this area that can replace this at a reasonable cost? Rather have some recommendations from someone here then to just drop it off at a shop I have no clue off...

Tyler Crocket could definitely do it for you. Tim Krolczyk (west michigan lake and trail) is reasonable but his shop is just west of GR. There should be plenty of shops capable of that repair.

Where is Tyler Crocket located? I have had two quotes so far from random shops... 700 and 1000. Seems a little high if Im removing the drive and disconnecting so all they have to do is lift the motor out.

We can handle it. We specialize in 22 Donzi's, check my site it has mapquest for location.

You can't go wrong with Brian!! I have taken my boat to him before and wouldn't hesitate to do it again. I have been in one of the 22's he has done at over 80 and it ran like a raped ape.

empty your P.M. box Donz

Just emptied it.

Art Sommers, Sommers Marine in Belle Maer Harbor (Lake Saint Clair).

North bay marine on Jefferson in new baltimore. Only place I will take my boat. 586-725-2628. High performance specialists. All in house machining.

Dynamic Speed and Marine, 45320 Jefferson Ave, Chesterfield, MI 48047 (586) 949-5990