Please post your HP500 EFI pics
 

Fellas and Ladies,
I'm building a 509 and using the 2000 HP500 EFI pwr. steering pump, alternator, crank pulley, circ. pump and tensioner. I do not plan on using the raw water pump and need to know if the serpentine belt will clear the inlet on the circ. pump. Basically take an HP500 EFI remove the raw water pump and , will it work? (assuming I use a slightly shorter belt)

I just went to my local Donzi dealer to look @ the 500's in their 38, but the damn batteries were dead, so we couldn't lift the elec. hatch...