![]() |
merc freshwater flush
I want to run my 2005 merc 502's on the hose…. but can't find where to put the hose… do I need an after market fitting??
thanks |
If its on the trailer just buy the ears that go on the outdrive.
|
Flush muffs and foam ear plugs for the low water pickups.... And I only boat in freshwater. It's not that I hate my neighbors, I just like noisy motors. :)
|
its running original TRS outdrives so no pickups in drives… therefore ear muffs no good
|
Originally Posted by way2fast
(Post 4064617)
its running original TRS outdrives so no pickups in drives… therefore ear muffs no good
|
Originally Posted by HyFive578
(Post 4064646)
where do you pick up water from?
|
Do you have a normal flush system installed? Like a male garden hose bib with a lever to switch motors. I don't have pickups on my drives so that's how I run mine
|
Originally Posted by 32hustlin
(Post 4065730)
Do you have a normal flush system installed? Like a male garden hose bib with a lever to switch motors. I don't have pickups on my drives so that's how I run mine
|
My setup is on the firewall, could be anywhere in the bilge though. Pics would help
|
I was sure the pickups those two scoops at the very bottom of the transom? common on nearly all old cigs?
|
if your intake grates are under the hull then get fake a lake water flush like what we use for the wakeboard boats.
Google fake a lake it looks somewhat like a toilet plunger but can be adjusted in heights. We use it all time for those style of intake grates under the hull. as all the wakeboard boats commonly have this set up. If you have transom mounted water pickups for the water intakes engine cooling side then fake a lake will not work |
My formula 272 has fresh water dockside flush. Hose fittings for each engine. It tees into the sea line from the outdrive, with I assume a check valve on the sea side. I now have the same issue with trs. I take the caps off the sea strainer and put the garden hose in it, works fine for now
|
they are not under the hull just at the transom... like the old flatdecks foxhunter and tag and release on here..
here are some examples look at the transom photos in the centre http://www.offshoreonly.com/classifi...o58409-en.html http://www.offshoreonly.com/classifi...o59193-en.html |
|
Why is my response 2 posts back?
|
1 Attachment(s)
Originally Posted by way2fast
(Post 4064465)
I want to run my 2005 merc 502's on the hose…. but can't find where to put the hose… do I need an after market fitting??
thanks For what it is worth here are where my fresh water flush is, and yes you need a plastic connector that goes on the end of a garden hose that is a quick disconnect into the fitting under those blue rubber caps that I circled. |
| All times are GMT -5. The time now is 08:14 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.