Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Lets see your engine hatches!! (https://www.offshoreonly.com/forums/general-boating-discussion/308157-lets-see-your-engine-hatches.html)

HEDGEHOGER 02-03-2014 12:03 AM

Lets see your engine hatches!!
 
Im looking for ideas for the engine hatches im going to be building in the spring im hoping to switch from a single hatch to two side flip hatches with scopes lets see what everybody has

Randy Nielsen 02-03-2014 12:39 AM

Are you "wanting" to build your own or would you buy some if they fit your needs? Randy

HEDGEHOGER 02-03-2014 09:08 AM

Looking to Building them for a final project In my composites class

HEDGEHOGER 02-03-2014 09:43 AM

:helmet:

Tom A. 02-03-2014 09:52 AM

4 Attachment(s)
Here are a few of my Donzi and one of my old Kryptonite

HEDGEHOGER 02-03-2014 10:12 AM

Tom do you have a center bar or they just fit together 1 first the the other ?

TeamSaris 02-03-2014 11:10 AM

5 Attachment(s)
[ATTACH=CONFIG]517798[/ATTACH][ATTACH=CONFIG]517799[/ATTACH][ATTACH=CONFIG]517800[/ATTACH][ATTACH=CONFIG]517801[/ATTACH][ATTACH=CONFIG]517802[/ATTACH]We did the opposite. Had Two side by side aluminium ones on the Cobra...bolted em together, used it as a mold and made one big one. Much lighter, less hassle.

Tom A. 02-03-2014 12:15 PM

1 Attachment(s)
It is actually just one hatch.

sonic700 02-03-2014 12:53 PM

2 Attachment(s)
Here are a couple pics of the one I built for my boat

spectras only 02-03-2014 12:54 PM

I did my hatch on the budget using 7 ply marine plywood ,painting it with PPG. Single hatch though. Boat used to have superchargers before so built the hatch with scoops in case I go back to superchargers. Now just two N/A Mercs under the hatch. The scoops sure help keeping under hatch temperatures down.

http://www3.telus.net/spectrasonly/Scoop%20project%202
http://www3.telus.net/spectrasonly/Scoop%20project%203
http://www3.telus.net/spectrasonly/Scoop%20decals
http://www3.telus.net/spectrasonly/E...ect%20complete

Ps; What I did with the two lifting rings you see on the hatch, when I raise the hatch to maximum I can pull the pin and switch ram to the rear that allows the hatch to go straight up for maximum access to grease couplings and do other service etc.....

HEDGEHOGER 02-03-2014 03:24 PM

Are you guys still able to move around and use the hatch as a sun pad or do the scoops take up most of the space?

spectras only 02-03-2014 03:41 PM


Originally Posted by HEDGEHOGER (Post 4068449)
Are you guys still able to move around and use the hatch as a sun pad or do the scoops take up most of the space?

The hatch is strong enough to walk on but no room to spread out on like a sun pad would do.

JRider 02-03-2014 04:32 PM


Originally Posted by HEDGEHOGER (Post 4068449)
Are you guys still able to move around and use the hatch as a sun pad or do the scoops take up most of the space?

If you plan on having pu$$Y on your boat and don't have superchargers build one with a bittcchh pad.

bauberlen 02-04-2014 12:14 AM

[IMG]http://i1200.photobucket.com/albums/...xhausttips.jpg[/IMG][IMG]http://i1200.photobucket.com/albums/...n/B69F0074.jpg[/IMG][IMG]http://i1200.photobucket.com/albums/...n/DSC06142.jpg[/IMG]

Slippery 02-05-2014 08:00 PM

3 Attachment(s)
[ATTACH=CONFIG]518035[/ATTACH][ATTACH=CONFIG]518034[/ATTACH][ATTACH=CONFIG]518033[/ATTACH]

ROB FREEMAN 02-05-2014 08:13 PM

look sweet

SFOcean 02-05-2014 08:34 PM

1 Attachment(s)
scoop

Dave M 02-05-2014 08:38 PM

4 Attachment(s)
Here's mine. No problem walking on it. The raised center section is a bit of a PIA when just lounging around.

Don Johnson 02-06-2014 09:17 AM

1 Attachment(s)
[ATTACH=CONFIG]518070[/ATTACH]


All times are GMT -5. The time now is 07:05 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.