M T I 36 with twin 1350
#71
Registered
Join Date: Sep 2011
Location: Midwest, LOTO, Miami Beach
Posts: 975
Likes: 0
Received 3 Likes
on
2 Posts
Ohhhh……and a matching Lifeline jacket with BAM on the left breast.. Thank you.
#72
Performance Boat Center
VIP Member
Gino's boat will leave the factory with the 1350s in it… He may do 1650s in the future…
The boats run so well with 1350s that you would really have to "want it" to go with the 1650s… $, race gas, and more maintenance are big factors.
Noone needs to know Ginos setup…but it will certainly run
The boats run so well with 1350s that you would really have to "want it" to go with the 1650s… $, race gas, and more maintenance are big factors.
Noone needs to know Ginos setup…but it will certainly run
__________________
Tim Gallagher
Performance Boat Center-FL
[email protected]
954-809-8739
Wright Performance, MTI, Cigarette, Sunsation
Tim Gallagher
Performance Boat Center-FL
[email protected]
954-809-8739
Wright Performance, MTI, Cigarette, Sunsation
#73
Registered
Thread Starter
Join Date: Apr 2009
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Gino's boat will leave the factory with the 1350s in it… He may do 1650s in the future…
The boats run so well with 1350s that you would really have to "want it" to go with the 1650s… $, race gas, and more maintenance are big factors.
Noone needs to know Ginos setup…but it will certainly run
The boats run so well with 1350s that you would really have to "want it" to go with the 1650s… $, race gas, and more maintenance are big factors.
Noone needs to know Ginos setup…but it will certainly run
thanks for the update TIM .... BAD ASS BOAT .... with any power !!!
#74
Performance Boat Center
VIP Member
Yes, Mark G's 38 will pull more propeller without trouble…
We set it up how he requested… It's quite a dragster as he has it set up now.
We set it up how he requested… It's quite a dragster as he has it set up now.
__________________
Tim Gallagher
Performance Boat Center-FL
[email protected]
954-809-8739
Wright Performance, MTI, Cigarette, Sunsation
Tim Gallagher
Performance Boat Center-FL
[email protected]
954-809-8739
Wright Performance, MTI, Cigarette, Sunsation
#75
Registered
I will bring my GoPro. I have become an expert with Premier Pro editing. I'll make that baby look fast even if it's not. We're not talking some boring ass suction cup look at my rooster tail mount. This is going to be on the extension pole, motor compartment shots, full action footage. Can you embroider "BAM" on my seat headrest.
Ohhhh……and a matching Lifeline jacket with BAM on the left breast.. Thank you.
Ohhhh……and a matching Lifeline jacket with BAM on the left breast.. Thank you.
#76
Registered
I, too wanted 1650's REAL bad, but hauling fuel by the drum and freshening motors way more often was a trade off I wasn't willing to make. There were other concerns as well, but I think the 1350' will push the rig along just fine.
#77
Registered
Tim, since my boat is at MTI right now, why don't you ask randy to throw some 1350's and big gears in her! Have randy take take her for a spin and see what she will do...LOL.
I like my 1100 set up though. Long as I can run with Chad, I'm happy! I like my lil dragster!
I like my 1100 set up though. Long as I can run with Chad, I'm happy! I like my lil dragster!
#78
Registered
chatviper: saw you boat there last week, gotta say its one of my all time favorites! The colors just pop on that boat! They had a few 1350's sitting on the floor, I'm sure they could swap them for a small fee! Lol
#79
Registered
Appreciate you saying that!! Thank you!
Maybe i'll get a sneak peak of yours when I pick mine up in a few weeks. If, your new beast is still there!
LOL, a small fee indeed!
Maybe i'll get a sneak peak of yours when I pick mine up in a few weeks. If, your new beast is still there!
LOL, a small fee indeed!