A little winter upgrade project
 

I started with this......

Then found this....
[ATTACH=CONFIG]520552[/ATTACH]

Which lead to this,,,,[ATTACH=CONFIG]520553[/ATTACH]

And progressed to this....


[ATTACH=CONFIG]520554[/ATTACH]

[ATTACH=CONFIG]520555[/ATTACH][ATTACH=CONFIG]520556[/ATTACH][ATTACH=CONFIG]520557[/ATTACH][ATTACH=CONFIG]520558[/ATTACH][ATTACH=CONFIG]520559[/ATTACH]

When did you start this project? Looks like a good amount of work you got going on there.

Been collecting parts for a while, started the new floor in January

What are the wood chunks on the side of the console for??? That boat should be a Ball as a Sit down. Be sure when youre sitting that your feet can push on the Kick panel, this will hold you in the seat. if you have a flat floor and you can't push back you won't feel secure.

That console is actually the mold for this... its a bit to small though so I am making one from scratch.

[ATTACH=CONFIG]520564[/ATTACH]

I'm not sure Rob has quite the grasp on what we're all about here. He brought over a box of stuff today an showed us his spiffy new 120 mph speedo and told us he was sending it back to Gaffrig to get re faced to like a 70 mph speedo . . . . . no Rob thats not how ya fix it . . . . ya re power to make the boat run 120 :picard1: . . . . :D

Possibly you have me/ my boat confused with....

http://www.offshoreonly.com/forums/g...e-1000-hp.html