wieland77

iTrader: (1)

I have 2 engine hatch cylinders that can no longer be repaired off a 1985 12 meter fountain and not sure how to find some replacements? There arent any markings on these cylinders and hoping someone may have an idea on were to find some? Or options with a different style replacement since I assume these are probably obsolete? The have about a 8 1/2" stoke and when fulled extended are 18". Thanks for any help guys! MIKE[ATTACH=CONFIG]520846[/ATTACH][ATTACH=CONFIG]520847[/ATTACH][ATTACH=CONFIG]520848[/ATTACH][ATTACH=CONFIG]520849[/ATTACH][ATTACH=CONFIG]520850[/ATTACH]

O.C.Barry

iTrader: (5)

[QUOTE=wieland77;4094980]I have 2 engine hatch cylinders that can no longer be repaired off a 1985 12 meter fountain and not sure how to find some replacements? There arent any markings on these cylinders and hoping someone may have an idea on were to find some? Or options with a different style replacement since I assume these are probably obsolete? The have about a 8 1/2" stoke and when fulled extended are 18". Thanks for any help guys! MIKE
They are the same as the early Merc Hydraulic assist steering rams. I have one nice used one.

phragle

iTrader: (3)

Why cant they be repaired???

wieland77

iTrader: (1)

Tried to get them repaired but there is a groove in the cylinder, tried to repolish and put new seal in and still leaks. I looked on Hardin and cant seem to find this cylinder Greatguy66 says they carry? Do you know of a part number?

Thanks O.C., might take it if your willing to part with it... just need to find another to match!

O.C.Barry

iTrader: (5)

I'll PM you.

Audiofn

OC is correct. Probably a TRS power assist is what it looks like to me.

Black Baja

iTrader: (2)

It could be spray welded and turned down. Then hard chromed. Or maybe just hard chromed. I've had cylinders repaired b4. Not sure if its cost effective though...