Help me identify Pn of attached picture
#1
Registered
Thread Starter
Join Date: Aug 2012
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Help me identify Pn of attached picture
I found this intake manifold picture online, and am curious to know its Pn.
https://www.flickr.com/photos/69163769@N07/13733888465/
https://www.flickr.com/photos/69163769@N07/13734287914/
I have a L31 intake on Vortec heads making 300hp, i am hoping this intake will help promote my Hotcam and rocker upgrade.
I have Electronic TB, and MPFI, i hope to control the fuel with dynojet CMDM so no issues with fuel injection
https://www.flickr.com/photos/69163769@N07/13733888465/
https://www.flickr.com/photos/69163769@N07/13734287914/
I have a L31 intake on Vortec heads making 300hp, i am hoping this intake will help promote my Hotcam and rocker upgrade.
I have Electronic TB, and MPFI, i hope to control the fuel with dynojet CMDM so no issues with fuel injection
#3
Registered
#7
Registered
iTrader: (1)
I think I remember seeing it on some Indmar engine. Ck with them: http://www.indmar.com/company/news.aspx
#8
Registered
Thread Starter
Join Date: Aug 2012
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Do you know of any great products i can buy and have the water jackets coated with? I am not in the states so logistically i am at a disadvantage...
#9
Registered
buy a closed cooling setup and run antifreeze in the engine. used big block heat exchanger will have all the cooling capacity u need. usually can be had for 500 or less.