Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Power Quest 380 Avenger (https://www.offshoreonly.com/forums/general-boating-discussion/311909-power-quest-380-avenger.html)

TNTBOATING 05-05-2014 07:12 PM

Power Quest 380 Avenger
 
I have a Power Quest 380 with 525's. I am yet to find another 380 with more than 500's. Also my boat is the only Power Quest I have seen with Power Quest in large graphics down the side. just curious if anyone else knows of one similar.

endeavor1 05-05-2014 08:50 PM

Poker run edition has 525s. Is it verbi69 that owns it?

dykstra 05-05-2014 09:00 PM


Originally Posted by endeavor1 (Post 4117569)
Poker run edition has 525s. Is it verbi69 that owns it?

I believe that boat was originally ordered/purchased at Riverview Marine in Spring Valley, IL?

Shortfuzed80 05-05-2014 09:04 PM

Yes Verbie is the owner of the poker run edition we boat together actually I also bought my 280 from him

Rbesola 05-05-2014 09:39 PM

There was an older 380 on boat trader years back with 600sc's and #3s. Only one I've ever seen with ssm's. Not sure if it was built that way or not. I doubt it

endeavor1 05-05-2014 09:46 PM


Originally Posted by Rbesola (Post 4117616)
There was an older 380 on boat trader years back with 600sc's and #3s. Only one I've ever seen with ssm's. Not sure if it was built that way or not. I doubt it

If it was the one in IL it had 5s

Rbesola 05-06-2014 05:58 AM

It might've been 5s. I can't remember, its been several years

Knot 4 Me 05-06-2014 07:34 AM


Originally Posted by dykstra (Post 4117578)
I believe that boat was originally ordered/purchased at Riverview Marine in Spring Valley, IL?

A guy named Tim from Wenona had it before Verbi. Pretty sure he is the original owner so Riverview makes sense. He is a member here but I haven't seen him post in quite some time.

Knot 4 Me 05-06-2014 07:38 AM


Originally Posted by Rbesola (Post 4117616)
There was an older 380 on boat trader years back with 600sc's and #3s. Only one I've ever seen with ssm's. Not sure if it was built that way or not. I doubt it

It was near me at Clinton Marine in Weldon IL for a couple years. To my knowledge it came that way from the factory. Next time I run into Jeff Gibbs (he slips on the dock next to me) I'll ask him to verify.

Sportboats 05-06-2014 09:50 AM

Biggest power was a factory poker run 575SCI in early 2000 and a 600DPX Volvo with Stelling headers which was obnoxiously loud.

TylerBurich 05-06-2014 01:33 PM

X2 On the one at Clinton Marine. It was a 600SC boat with #5's.

Rbesola 05-06-2014 05:01 PM


Originally Posted by Knot 4 Me (Post 4117721)
A guy named Tim from Wenona had it before Verbi. Pretty sure he is the original owner so Riverview makes sense. He is a member here but I haven't seen him post in quite some time.

Technically Tim was the first owner. Riverview ordered it as a demo and ran it for close to two years. It then went back to PQ and they went through it fixing everything from paint to upholstery to whatever to make it new again then Tim eventually bought it. He now has a 46 sea ray so that's why you don't see him here anymore

dykstra 05-06-2014 09:55 PM


Originally Posted by Knot 4 Me (Post 4117721)
A guy named Tim from Wenona had it before Verbi. Pretty sure he is the original owner so Riverview makes sense. He is a member here but I haven't seen him post in quite some time.

Yes. You are correct!!


All times are GMT -5. The time now is 05:51 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.