496ho fuel system help!
Motors were running fine ..changed fuel water seperator filters and now want run..fired off for a second then ran out of fuel..filled filters with fuel but some spilled out while putting on...have took off and refilled and cycled key several times..pump runs and cuts of buy motor want start..ran fine prior to filter change..any way to prime system?? Any help would be greatly appreciated. .thanks
|
Originally Posted by 32-DD
(Post 4122581)
Motors were running fine ..changed fuel water seperator filters and now want run..fired off for a second then ran out of fuel..filled filters with fuel but some spilled out while putting on...have took off and refilled and cycled key several times..pump runs and cuts of buy motor want start..ran fine prior to filter change..any way to prime system?? Any help would be greatly appreciated. .thanks
|
take a small screw driver and see is your getting pressure at the schrader valve on the fuel rail. if not bleed it
|
thanks for replies drained air at shradder valve and now running!
|
All times are GMT -5. The time now is 04:27 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.