Offshoreonly.com
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Home made drive showers? (https://www.offshoreonly.com/forums/general-boating-discussion/313256-home-made-drive-showers.html)

92nsx 06-06-2014 07:25 AM
Originally Posted by Big Block (Post 4132573)
Looks like brake line?
Correct, 5' one to be exact. You win a cookie :)
Tubing bender, 1/8" drill bit, tape mesure, sharpie and a cold beer
Once bent into the shape i drilled a dozen or so 1/8" holes on the side of the tubing.

Probable acts more like a pressure washer then a cooler, LOL.

Thebros 06-06-2014 11:06 AM
they say it only drops the oil about 4 to 5 degrees not worth the hassle you should use a power steering cooler run your raw water through it and a pump for the oil to do the job right

12meter joe 06-06-2014 11:17 AM
1 Attachment(s)
thinking about trying this one.

[ATTACH=CONFIG]524361[/ATTACH]

Pilotpete 06-06-2014 11:22 AM
Originally Posted by Thebros (Post 4133761)
they say it only drops the oil about 4 to 5 degrees not worth the hassle you should use a power steering cooler run your raw water through it and a pump for the oil to do the job right
Simrek has testing showing 50+ degree temp drop. Certainly worthy of considering the hassle. In high performance anything, I'm a big fan of all the cooling you can stand.


All times are GMT -5. The time now is 01:55 AM.
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.