Offshoreonly.com - Who makes a 1 1/4 T with a 5/8 inlet?

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Who makes a 1 1/4 T with a 5/8 inlet? (https://www.offshoreonly.com/forums/general-boating-discussion/314748-who-makes-1-1-4-t-5-8-inlet.html)

Velocity Tom

07-05-2014 02:27 PM

Who makes a 1 1/4 T with a 5/8 inlet?

Im installing a fresh water flush and I need a 1 1/4 T with a 5/8 inlet to go to the flush hook up. I looked on CP. and Hardon marine.

fireboatpilot

07-05-2014 03:27 PM

I switched all my hoses to AN fittings but you should be able to find a brass barb fitting in 5/8" at a plumbing supply house. Industrial supply might even have a stainless one?

Scott B

07-05-2014 06:07 PM

Stainless Marine has made me several tee's in the past. I usually use 3/4" for the flush..

HyFive578

07-05-2014 06:30 PM

Teague Custom Marine.. Call Eric, he will make you anything you need. I bought all of my flush parts from him last year..

DiamondPerformance

07-05-2014 08:32 PM

We have 3/4" Tee.

Black Baja

07-05-2014 08:53 PM

I ordered all my stainless fittings and ball valves off ebay for about 10% of what the big names want for them...

teaguecustommarine

07-11-2014 12:23 PM

We can make any reasonable SS tee imaginable! Give me a call and let me know what you are looking for, we probably have it on the shelf! -Eric

TEAGUE CUSTOM MARINE
661-295-7000
www.teaguecustommarine.com

All times are GMT -5. The time now is 03:42 PM.