Offshoreonly.com - Looking to replace a standard rotation Evinrude lower unit. Who sells them reman?

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Looking to replace a standard rotation Evinrude lower unit. Who sells them reman? (https://www.offshoreonly.com/forums/general-boating-discussion/315014-looking-replace-standard-rotation-evinrude-lower-unit-who-sells-them-reman.html)

CanDo

07-13-2014 06:52 PM

Quote:

Originally Posted by BUP (Post 4152147)

Correct info from MRV and you have to measure for proper height of the shift rod after you installed it and do this before you reinstall your lower unit. Their is a special measuring tool thru OMC or some will use a measuring tape to check proper shift rod height. FYI

Most likely you not get the drain plugs either from SEI. I know for a fact you will not get the nuts/bolts and anodes.

MRV I take you are tech who works on outboards?

Its comes primered as well. So you need to paint it. Does not come with a water pump assembly either.

mrv8outboard

07-14-2014 07:06 AM

Yes I am. SEI has been sending them with drain plugs lately. A tape measure or yard stick at least to the 32nd, 64th's are best.

low_psi

07-24-2014 11:29 AM

Looks like I will be trying out an SEI lower for one of my OptiMax 225s... Blew up my counter rotating lower on Tuesday, blew a hole in the side of the case.... SEI price is $1045 for the counter rotating, which isn't bad especially with a 3 year warranty.

All times are GMT -5. The time now is 03:12 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page