HELP! ID this hydrualic steering ram vendor
1 Attachment(s)
I need help identifing this hydrualic steering ram vendor/Manufacturer? It is 24" overall lenght, and 16" cylinder. It has a small leak and I need to send it off for a rebuild.
Thanks, Dean |
Sorry, I can't identify the manufacture, but any hydraulic hose and seal shop will be able to help you out.
|
Originally Posted by kaama82
(Post 4159035)
Sorry, I can't identify the manufacture, but any hydraulic hose and seal shop will be able to help you out.
thanks for the advice, but I alrady called central Hydraulics and they said they don't like to work on marine steering rams, they say alot of them are metric? |
1 Attachment(s)
That seems to reminds me of wpm rams I have in my setup[ATTACH=CONFIG]526565[/ATTACH]
|
Originally Posted by Wobble
(Post 4159101)
That seems to reminds me of wpm rams I have in my setup.[ATTACH=CONFIG]526564[/ATTACH]
close but if you look at the ends on your rams vs. my ram, they are different...I think it's a Mayfair ram myself. Thanks, Dean |
It's mayfair for sure. Hardin sells a rebuild kit and there's nothing to taking them apart and replacing the seals.
|
Originally Posted by payuppsucker
(Post 4159137)
It's mayfair for sure. Hardin sells a rebuild kit and there's nothing to taking them apart and replacing the seals.
Yep, i just got off the phone with Jeff at Hardin, the seal kit is on the way should be here tomorrow. Thanks guys for the help. |
No problem, glad to help.
|
All times are GMT -5. The time now is 09:22 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.