Upholstery - SE Michigan
 

I'm looking for suggestions/recommendations on an upholstery shop in SE Michigan.

I have a bench seat which had rotten wood and torn vinyl. I've replaced all of the wood and reassembled the seat. Now it's on to upholstery. For that, here's what I'm looking for:

- Currently there are three colors of vinyl in the bench seat. I'm okay losing one of those colors, if it saves $$
- The current stripes are contoured. I can live without it, if that's a money-saver.
- Add three ¾” foam “bumps” in seat bottom and back to add slight bolstering effect. I added strips of ¾” ply where I want these to be.
- Add three grab straps around the pad which is behind the knees for the passengers to grip, similar to small versions of the straps on a jet-ski seat.
- Replace welting/piping on existing skin with double French seams

I also asked for Drifast foam, in a firmness much higher than the current foam, but I’m okay with the material cost of that.

For the above job, I've been quoted what I think is an obscene amount of money, albeit it was from what appears to be the premier upholstery/trim shop in the area. While I'd love to have them do the job, I'm comfortable with 90% of the quality if it can be had for 50% of the price.

So, can anyone recommend an upholsterer to me that won't force me to take out a loan?

Give XT innovations a call. He is in Bucyrus Ohio, roughly an hour south of Sandusky. He did my interior and it is awesome.

I'd go with Appearance Products of Grand Rapids. They did a great job with my boat (via a previous owner) a few years ago, and I believe they do pretty much all the new Skaters. appearanceproductsinc.net

Send samples to Miami Corp. they matched my 25 year old vinyl and were great to deal with too!!

http://www.miamicorp.com

Get a hold of Chris at Mcleod design group they are in Madison heights MI.

I would go with XT in Ohio. I have seen their work and its top notch. I would stay away from Bohemian in Wyandotte. That is unless you don't need your boat back until 2016.. That guy is an a-hole and on his own schedule. He does really good work, but just a pain in the a$$ to deal with. He did my Velocity. I was very pleased with the work, it just took me having to threaten to pull the job out from under him to get him moving (and that was after he had everything for almost 6 months!)

Try Laird's Glass and Trim in Plymouth MI. They made bolsters for the old #5 Gentry boat that a friend owned. Excellent work and very reasonable. Ask for Tim. He is the owner.

Based on this, I'd stay away from "Bob the Boat Seat Guy."

Xt innovations!
Don't go elsewhere!

We will be boating in Fort Lauderdale this winter and we would like to get our boat upholstery redone , Donzi 38. Can anyone recommended a shop in Florida ?
any help is greatly appreciated

yep, just got another set done by them for a center console i am finishing up. Great job and good price.

I also say XT Innovations.....mine was fully custom, simple old school style, and looks amazing!!! great price and factory quality....the stripe idea looks sweet from above!

[ATTACH=CONFIG]533588[/ATTACH][ATTACH=CONFIG]533589[/ATTACH][ATTACH=CONFIG]533590[/ATTACH][ATTACH=CONFIG]533591[/ATTACH]

I ended up having XT do this work and am satisfied with the results. "Thumbs-Up" recommendation from me.

xt is who I used . they did my 35 lightning, I could not be happyr . good work , good prices, on time.

Hello I'm new to the forum but I would like to tell all Boaters who have had a McLeod Designed interior. That recently we here at HRT have purchased the Mcleod Design Group, we are currently available for any updates to your interiors or new interiors sorry for the delay. Many banks and legal issues had to be solved before going forward I hope we can help all our offshore Powerboat friends in bringing the high quality of Mcleod interiors back under the new Name of HRT. We have retained all of the interior components and personal to continue making great high class interiors, thank you and sorry for the delay. For updates to interiors contact me, here on the forum or please feel free to call.


Sincerely

Miraj D'Ave
Project Engineer HRT
248-284-1170 EXT: 113

Thread is 1.5yrs old, you have made 11 identical posts, maybe you should contact OSO and become an advertiser.

Thanks lee, I will contact OSO and become an advertiser. I know people out there have had trouble contacting Mcleod deigsn group, since the interior group is no longer in limbo, I felt everyone should know. Enjoy your day LEE