Notices

Bilge pump replacement

Old 08-13-2014, 03:25 PM
  #1  
Registered
Thread Starter
 
Join Date: Apr 2014
Location: Cape Coral, Fl.
Posts: 37
Likes: 0
Received 0 Likes on 0 Posts
Default Bilge pump replacement

It may look easy to get at but its buried beneath a 502 and only my phone can get a good look at it. I would like to know what brand it is and how it attaches. I do not want to change brands because I would have to try and mount the new one with new holes, and that's not happening, especially in this SW Florida heat combined with my shape and age. Any help would be greatly appreciated.
Thanks
Scott
Attached Thumbnails Bilge pump replacement-photo-1-2-.jpg   Bilge pump replacement-photo-2.jpg  
scottcleaver is offline  
Old 08-13-2014, 03:48 PM
  #2  
Registered
 
Join Date: Sep 2013
Location: Southeast Michigan
Posts: 1,879
Received 7 Likes on 6 Posts
Default

Pretty sure that is a Johnson brand pump. Check Cabela's, I think they still sell them. You're gonna need an inspection mirror or more photos to verify this, but I think you'll find 2 locking tabs 180 degrees apart. Push them in and the pump portion should lift out of the mount.
Speedracer29 is offline  
Old 08-13-2014, 03:54 PM
  #3  
Registered
 
Join Date: Sep 2013
Location: Southeast Michigan
Posts: 1,879
Received 7 Likes on 6 Posts
Default

Here's a link to Cabela's, you'll need to know GPH to get a replacement.
http://www.cabelas.com/product/Johns...mps/700041.uts

MODS, I only posted the link to be helpful, please don't pull out the ban hammer! I aspire to be old and husky someday, so this is me paying it forward.
Speedracer29 is offline  
Old 08-13-2014, 04:42 PM
  #4  
Forum Regulator
VIP Member
iTrader: (1)
 
Sydwayz's Avatar
 
Join Date: May 2001
Location: Worldwide
Posts: 23,790
Received 1,137 Likes on 500 Posts
Default

Good info on the link above. Your old unit should snap right out of that base, and a new one snap right in.
Sydwayz is offline  
Old 08-13-2014, 06:59 PM
  #5  
Registered
Thread Starter
 
Join Date: Apr 2014
Location: Cape Coral, Fl.
Posts: 37
Likes: 0
Received 0 Likes on 0 Posts
Default

Thank you gents. I bought a new Johnson pump to match the original base. It will snap right into the base with no mounting needed.
Thanks
Scott
scottcleaver is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.