Offshoreonly.com - It looks like Crane is not the valve train component for me!

Page 9 of 11

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - It looks like Crane is not the valve train component for me! (https://www.offshoreonly.com/forums/general-boating-discussion/318562-looks-like-crane-not-valve-train-component-me.html)

Randy Nielsen

01-10-2015 10:17 PM

I have more to tell but I need to get some pictures downloaded first and some other stuff kind of needs my attention.

Hopper

01-11-2015 03:17 PM

Quote:

Originally Posted by Randy Nielsen (Post 4247564)

I have more to tell but I need to get some pictures downloaded first and some other stuff kind of needs my attention.

cant wait to see it.... but I don't think anything else could surprise me with this Hack OMFG

Randy Nielsen

01-11-2015 04:08 PM

2 Attachment(s)

[ATTACH=CONFIG]535580[/ATTACH][ATTACH=CONFIG]535581[/ATTACH]how about dirt under the bearings and a cracked block?

Kings11

01-12-2015 04:38 PM

Quote:

Originally Posted by Hopper (Post 4247523)

I just found this thread.... i am surprised they ran 100 hours with no issues... Bullet engine seems to be a very unreliable engine builder.. It blows my mind how these guys stay in business!!!!!! I hope people read these threads!!!!

Never understood that myself when there is two great builders with in 3 hours.

Black Baja

01-12-2015 05:41 PM

Quote:

Originally Posted by Randy Nielsen (Post 4247832)

[ATTACH=CONFIG]535580[/ATTACH][ATTACH=CONFIG]535581[/ATTACH]how about dirt under the bearings and a cracked block?

Dam Randy sorry to hear that. Looks like someone ran the pipe plugs in way to far...

Hopper

01-12-2015 05:55 PM

well..... at least we all know that it wasn't just our bad luck.... we truly were all ripped off and lied to.... what goes around comes around I guess.... and he has the
nerve to advertise on OSO I hope anyone looking for a Bullet engine can find these threads or at least post asking about them!!

Hopper

01-12-2015 05:56 PM

Quote:

Originally Posted by Kings11 (Post 4248435)

Never understood that myself when there is two great builders with in 3 hours.

what builders?

Hopper

01-13-2015 05:50 PM

Quote:

Originally Posted by Black Baja (Post 4248490)

Dam Randy sorry to hear that. Looks like someone ran the pipe plugs in way to far...

who needs a Torque Wrench.... Thanks again Bullet Engines in KIngston You are the BEST!! :stooges:

Kings11

01-15-2015 10:45 PM

Quote:

Originally Posted by Hopper (Post 4248501)

what builders?

Engine Research Inc in Cobden. Builds a lot of DIRT motors sprint and mod. Has done 383's and 427's I've run in a Chris Craft and now the Regal. Currently building me 556's as well. Has done some 454's as well for Marine. All in all he's built 100 motors for my father before he passed, majority of them in the Marine application.

There is a builder in Toronto as well that just isn't coming to my mind.

mcprodesign

01-20-2015 02:08 PM

Quote:

Originally Posted by BUP (Post 4243458)

Who is Ryan - is he building your engines now ?

I'll say it again anytime you see a marine engine builder and or a marine tech using silicone on engine parts or even on the outdrives , its a builder and tech you want to stay away from completely. In the industry they are called shadetrees.

Pfaff used silicone on my intake. They must have to pull them back apart a lot. I have had good luck with great stuff. And Randy FYI . I am just using my motor for a bench right now . lol ;)

All times are GMT -5. The time now is 07:26 AM.

Page 9 of 11

« First

Show 40 post(s) from this thread on one page