Offshoreonly.com - Outerlimits SV29 West Coast Edition goes into Production...!!!

Page 6 of 9

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Outerlimits SV29 West Coast Edition goes into Production...!!! (https://www.offshoreonly.com/forums/general-boating-discussion/318963-outerlimits-sv29-west-coast-edition-goes-into-production.html)

freshwaterfiend

10-23-2014 10:28 AM

Is the 4800lb weight with or without an engine and drive? Seems quite light for a near 30 footer.

Indy	10-23-2014 10:52 AM

Quote:

Originally Posted by shueman (Post 4207803)

Transom...
[ATTACH=CONFIG]531383[/ATTACH]

Bustle. Nothing a good reciprocating saw can't take care of. I'd have a bracket mounted on that baby in a hour! :);)

Wildman_grafix

10-23-2014 11:02 AM

But a twin OB version would be cool.

phragle

10-23-2014 11:07 AM

Quote:

Originally Posted by freshwaterfiend (Post 4207865)

Is the 4800lb weight with or without an engine and drive? Seems quite light for a near 30 footer.

SBI's SVL weight min. is 4750 I believe and if I remember right SMB added weight (before parity) to be legal. True the standard boat has full interior but SMB has a canopy. This would lead one to believe the weight claim is close. Does anyone know if SMB is the innerlinner setup like the regular boat or stringers/bulkheads?

shueman

10-23-2014 11:50 AM

Quote:

Originally Posted by Indy (Post 4207879)

Bustle. Nothing a good reciprocating saw can't take care of. I'd have a bracket mounted on that baby in a hour! :);)

:drink: Let's do one...!!!

Sirbells

10-24-2014 06:06 PM

Hey Shue how she doing today.... anything new

shueman

10-24-2014 09:58 PM

1 Attachment(s)

Quote:

Originally Posted by Sirbells (Post 4208603)

Hey Shue how she doing today.... anything new

Jose has been detailing the small mold pieces for the past few days...very labor intensive all-by-hand work...
[ATTACH=CONFIG]531497[/ATTACH]

shueman

10-24-2014 10:10 PM

Quote:

Originally Posted by Wildman_grafix (Post 4207887)

But a twin OB version would be cool.

Could be done, Bob said...motors would be tight together in the center of the transom...I'll measure that rear pad tomorrow..

DPT MOTORSPORTS

10-25-2014 06:31 AM

What is this one pictured going to be powered with???

shueman

10-25-2014 09:23 AM

Quote:

Originally Posted by dpt motorsports (Post 4208817)

what is this one pictured going to be powered with???

tcm 825

All times are GMT -5. The time now is 06:29 PM.

Page 6 of 9

« First

Last »

Show 40 post(s) from this thread on one page