Offshoreonly.com - NMEA 2000 tab/drive position senders for #6 drives?????

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - NMEA 2000 tab/drive position senders for #6 drives????? (https://www.offshoreonly.com/forums/general-boating-discussion/319377-nmea-2000-tab-drive-position-senders-6-drives.html)

302Sport

10-22-2014 06:43 AM

NMEA 2000 tab/drive position senders for #6 drives?????

Do the new ones come with the senders? Does anybody else except for Livorsi make them?

Mbam	10-22-2014 01:52 PM

I think you called here this AM -

Take a look at this thread I think this is what you need

http://www.offshoreonly.com/forums/e...dicatorss.html

You can find the sender components here

http://www.mercruiserparts.com/Show_...Trim+Sensor%29

smiklos@sunprint

10-22-2014 03:22 PM

Marc on the smartcraft sender do you know which wire is the 5volt line?
Thanks
Steve

Mbam	10-22-2014 05:58 PM

Pin A purple/black = 5v
Pin B brown = signal
Pin C black/orange = ground

All times are GMT -5. The time now is 01:39 PM.