New marine product - Your opinion please!
08-29-2002, 11:45 PM
#1
Registered
Thread Starter
Join Date: Oct 2000
Location: Lake Travis, TX
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
New marine product - Your opinion please!
I'm doing some market research here - I'm a technology entrepreneur and offshore enthusiast and I have recently been in contact with a firm that holds a patent for a device that I think could be transformed into a very useful marine sensor/alarm.
ENGINE OIL CONTAMINATION ALARM
The device consists of a sensor and a standard size gauge that continually monitors the relative amount of (salt or fresh) water or coolant that has leaked into your engine oil, detecting it long before the dreaded milk effect is visible, yet able to ignore false alarms such as might be caused by condensation water.
I think this could serve as an early warning system for gasket, header, and manifold water leaks all of which can lead to big-dollar repairs within a few hours of operation if undetected. The sensor could probably also be used to monitor outdrive oil for the same benefit.
I'd sincerely appreciate your opinion, positive or negative, on its viability as a product. If there appears to be enough interest I will move forward with them to bring it to market asap.
ENGINE OIL CONTAMINATION ALARM
The device consists of a sensor and a standard size gauge that continually monitors the relative amount of (salt or fresh) water or coolant that has leaked into your engine oil, detecting it long before the dreaded milk effect is visible, yet able to ignore false alarms such as might be caused by condensation water.
I think this could serve as an early warning system for gasket, header, and manifold water leaks all of which can lead to big-dollar repairs within a few hours of operation if undetected. The sensor could probably also be used to monitor outdrive oil for the same benefit.
I'd sincerely appreciate your opinion, positive or negative, on its viability as a product. If there appears to be enough interest I will move forward with them to bring it to market asap.
Last edited by Sandahl; 08-29-2002 at 11:57 PM.
08-30-2002, 06:33 AM
#2
Charter Member #232
Charter Member
Sounds like a great idea....... Well two more holes in the dash!!!! 
I would want to make sure that there are ways of knowing if I am contaminated with this or that. Also a readout of some sort would be better I would think then a dummy allarm as you can see if at for example start up you could have lots of condensation in there, then when it gets warmed up you can watch it all burn off at the guage drops off again. Just some ideas to think about. Sounds like a start however
Jon
I would want to make sure that there are ways of knowing if I am contaminated with this or that. Also a readout of some sort would be better I would think then a dummy allarm as you can see if at for example start up you could have lots of condensation in there, then when it gets warmed up you can watch it all burn off at the guage drops off again. Just some ideas to think about. Sounds like a start however Jon
__________________
Put your best foot forward!
Put your best foot forward!
08-30-2002, 07:12 AM
#3
Guest
Posts: n/a
Great Idea - like everything, price is critical. Despite the saying " you can pay me now or pay me later " type of thinking. It must be price sensitive.
Why bother with expensive marketing and / or advertsing! Sell the rights to Mercury Marine or a company like Livorsi ( Gaffrig )
Good Luck
Why bother with expensive marketing and / or advertsing! Sell the rights to Mercury Marine or a company like Livorsi ( Gaffrig )
Good Luck
08-30-2002, 08:37 AM
#5
Sandahl
Do you have and invention co. I have a great Idea for a prodoct that every boat needs, but no one to share it with. As soon as I tell someone, they will do it and make a fortune.
Randy Wild
Randy Wild
08-30-2002, 10:02 AM
#6
Platinum Member
Platinum Member
New product idea
Hey Wild,
Taking new products from idea to finished goods for the Marine Industry is what I do all day long. Give me a call and we discuss your idea. If it's feasable I will pay you a royalty on every unit sold.
Kevin Schulte Hardline Products phone 805-581-4700
Taking new products from idea to finished goods for the Marine Industry is what I do all day long. Give me a call and we discuss your idea. If it's feasable I will pay you a royalty on every unit sold.
Kevin Schulte Hardline Products phone 805-581-4700
08-30-2002, 10:43 AM
#7
Registered
I believe the water sensor in oil is a great idea. Water can destroy an engine quickly. Blow a head gasket/intake gasket and you could have serious problems. Gas in oil is (I feel) a low priority issue.
