Looking for specific type of hatch actuator and cant find it
#1
Registered
Thread Starter
Looking for specific type of hatch actuator and cant find it
Looking for a hydraulic actuator that doesn't have anything on. I am running a remote hydraulic pump, so I don't need one on the actuator and the ones I am finding have a pump on the actuator itself.
Like these: http://www.cpperformance.com/p-13750...-capacity.aspx
Basically what I need is that but without the motor on it.....
Like these: http://www.cpperformance.com/p-13750...-capacity.aspx
Basically what I need is that but without the motor on it.....
#2
what about a small trim cylinder like from a gen one or MR Alpha?
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
#4
Registered
Thread Starter
Thanks guys. McMaster carr doesn't really have what I am looking for. I forgot to mention that it needs to be 24"...
Last edited by 302Sport; 01-19-2015 at 10:20 AM.
#6
Registered
Bennett has them. My Baja has 2 of them (1 on each side of the hatch). 24". They ues a trim tab pump to move them. Only down side is the tank is a little small for 2 - 24" rams. I lose out on 4" or so of life because it drains the tank of oil. Other then that there so-so speed but nice and quite, unlike electric ones that are loud as chit.
http://www.bennetttrimtabs.com/catal...?vID=270&cID=5
http://www.bennetttrimtabs.com/pdf/h...mber_chart.pdf
http://www.bennetttrimtabs.com/pdf/s...l_Diagrams.pdf
I dont have any photos of them beside where they made it in a back ground.
http://www.bennetttrimtabs.com/catal...?vID=270&cID=5
http://www.bennetttrimtabs.com/pdf/h...mber_chart.pdf
http://www.bennetttrimtabs.com/pdf/s...l_Diagrams.pdf
I dont have any photos of them beside where they made it in a back ground.