prop rotation in or out on cats
Just curious what rake props and rotation most are running on cats.
|
On my 35 motion turning in
|
out for speed, in for handling. 16 or 18 on rake
|
Originally Posted by flight club
(Post 4256313)
out for speed, in for handling
+1 |
Originally Posted by flight club
(Post 4256313)
out for speed, in for handling. 16 or 18 on rake
|
It all depends on the boat, type of drives... Lots of variables.. As Ron said 16-18 degree rake but the diameter depends on the boat.. It's sort of a loaded question
|
Average would be 18 turning in. Lower rake will generally lift transom and higher rake allows more bowdise . In most cases turning out will give more transom lift(think about water coming off the deadrise of fhe sponson with outward rotation. The blade moving downward will contact the water much sooner in the stroke than if turning inward.) Of course there are many other variables.
|
Just switched to out ( 36 NT), picked up 8 MPH and handles good. when turning in it felt like it was picking the back of the boat up to much....18 rake.
|
I am getting close on completing a 36 Nortech 800hp .trying to pick props and set-up. In or out. Thanks for the input.
|
predisiondetails in 3....2....1......
Lol just messing with you PD! |
All times are GMT -5. The time now is 02:07 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.