looking for a 22 bravo 1 or a labbed 24 bravo 1
#2
Chris,
We missed you yesturday. Christine and I hopped on with Scott and went waaayy up to the Catskills. Very nice ride. Paul ran his new motor flawlessly and Jill were also there.
I left a 23 4 Blade Predator w/ Scott....Paul wanted to try it. If you would like to give it a shot when those guy's are done let me know.
I think Scott may have a 24BI. Not sure.
We missed you yesturday. Christine and I hopped on with Scott and went waaayy up to the Catskills. Very nice ride. Paul ran his new motor flawlessly and Jill were also there.
I left a 23 4 Blade Predator w/ Scott....Paul wanted to try it. If you would like to give it a shot when those guy's are done let me know.
I think Scott may have a 24BI. Not sure.
#3
Registered
Thread Starter
Join Date: Mar 2002
Location: NY
Posts: 4,127
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Chris...
Sorry I missed you guys also, the weather was CRAP !! all weekend, I burned a lot of gas the day before and plan to burn a lot on sunday ( SBI ) so I decided not to go, should have went with Paul though, would have been a nice run.
I tried Scott's 24B1 and loved it, lost 300 rpm's but maintained top end and the handling is AWESOME !!! 60 mph u-turns and NO caviataion, 3.5 seconds on plane ( used to be about 6 ) so IF I can find a labbed 24 I should have my rpm's and handling..
I tried Scott's 24B1 and loved it, lost 300 rpm's but maintained top end and the handling is AWESOME !!! 60 mph u-turns and NO caviataion, 3.5 seconds on plane ( used to be about 6 ) so IF I can find a labbed 24 I should have my rpm's and handling..
#4
VIP Member
iTrader: (1)
I've got a 22" Mach Sterndriver that has only 8 hours on it. This prop works very well it was just the wrong pitch for the application. I am looking for 200.00 I will pay the shipping.
You can email me at [email protected]
Dave
You can email me at [email protected]
Dave
#5
Registered
Join Date: Aug 2001
Location: Channel Islands, So. Cal.
Posts: 13,696
Received 2,975 Likes
on
983 Posts
Hey Chris, I have a Bravo 23 pitch 3 blade....Don't know if you're looking for 3 or 4 blade. It's been labbed and has not been used since being done. Let me know if it sounds like something you need.
Tank
Tank
#7
Registered
Thread Starter
Join Date: Mar 2002
Location: NY
Posts: 4,127
Likes: 0
Received 0 Likes
on
0 Posts
I tried a 24p bravo 1 4 Blade ....
I lost 300 rpms, but the handling and time on plane were awesome, top speed was only down maybe 1mph. I figure if I could get my hands on a labbed 24 bravo, I would get my rpm's back and probably a couple of mph also..