|
Powerplay 185-XLT hull question
I was wondering if the hull is cored in the Vee section under the engine as I would like to epoxy a depth sounder transducer in the bilge at the front of the engine . If anyone has knowledge of this I would love to know before I try , I"ve had good luck doing this in previous boats , but didn't want to bother if it's not gonna work.The boat is an 88 , not sure if hull layup has changed thru the years .
|
Originally Posted by 350waternut
(Post 4294985)
I was wondering if the hull is cored in the Vee section under the engine as I would like to epoxy a depth sounder transducer in the bilge at the front of the engine . If anyone has knowledge of this I would love to know before I try , I"ve had good luck doing this in previous boats , but didn't want to bother if it's not gonna work.The boat is an 88 , not sure if hull layup has changed thru the years .
No core in the hull... just fiberglass. I did the same last year and it was a very easy install. |
Thanks , that's just what I was hoping to hear .
|
| All times are GMT -5. The time now is 09:39 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.