Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Looking for a surveryor in Baltimore area (https://www.offshoreonly.com/forums/general-boating-discussion/325610-looking-surveryor-baltimore-area.html)

kdx221 04-27-2015 08:06 AM

Looking for a surveryor in Baltimore area
 
I am looking at purchasing a 25' Baja in the Baltimore area. Anyone know of any reasonably priced surveyors in that area?

offshoredrillin 04-27-2015 08:08 AM

William (Bill) Love, AMSŪ
SAMSŪ Accredited Marine Surveyor
(410) 330-8564
(443) 817-2063 fax
[email protected]

venmous28 04-27-2015 08:17 AM

Reno O. Panico, SAMSŪ AMSŪ
Principal Marine Surveyor
301-807-7593

http://www.atlanticseaboardmarine.com/

Stuckonstupid 04-27-2015 11:14 AM


Originally Posted by offshoredrillin (Post 4297279)
william (bill) love, amsŪ
samsŪ accredited marine surveyor
(410) 330-8564
(443) 817-2063 fax
[email protected]

x2

kdx221 04-27-2015 12:01 PM

Thanks guys.

kdx221 04-27-2015 12:03 PM

This will be the first time I have had a survey done. Not a lot of systems to check on Baja 252 Islander. Any idea what I can expect to pay for a survey.

BUP 04-27-2015 08:13 PM

get a MECHANICAL inspection done as well by a real certified OEM tech. If it is a MPI engine make sure they have the ability to scan the engine and able to understand the results and parameters of the scan. Pulling outdrives (inspection) and engine leak down tests, spark plug reading & fuel pressure tests are highly recommended. I even like to drain the gear oil and pressure test the outdrive especially if I see brand new oil or any traces of milky oil. I also like to check propshaft runout. Engine vacuum tests is another good test to perform especially for carb engines. Fuel samples from the gas tank should be performed especially with todays gas blends and those problems it creates. There is also water detecting paste that can be used for gas and oil for water intrusion testing.

Even a lake test and again if MPI engine running the scan while running the boat down the lake. Most surveyor's - not all - are not that engine indepth nor have the current equipment to properly diagnose current engines. Just saying.

1989mach1 04-27-2015 09:16 PM

Hope the boat isnt caught on fire befor or after.


All times are GMT -5. The time now is 12:05 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.