|
hose clamps and puppy
1 Attachment(s)
Between the hose clamp cuts working on the engines and new puppy teeth I look like a cutter and needle addict combo with all the cuts and needle teeth marks
.[ATTACH=CONFIG]541272[/ATTACH] |
Now that is one good looking dog!
However, I like WC Fields maintain- "anyone that hates dogs and kids can't be all bad" 3pointstar |
agree on the pup
I feel ya on the cuts I added a ballast tank with transfer pump in the front vee and wanted both fuel fills side by side and had to worm a 1 1/2 fuel fill line though a stringer into the outside cavity through another floor hole into the original cavity that the rest of the hoses/wiring is ran up through both arms look like a junkie,,lol but got them fuel fills together,,,,,,,,,,, |
Originally Posted by johnmiffco
(Post 4306756)
agree on the pup
I feel ya on the cuts I added a ballast tank with transfer pump in the front vee and wanted both fuel fills side by side and had to worm a 1 1/2 fuel fill line though a stringer into the outside cavity through another floor hole into the original cavity that the rest of the hoses/wiring is ran up through both arms look like a junkie,,lol but got them fuel fills together,,,,,,,,,,, A couple of weeks ago I tried to lubricate the coupler fittings-- in fact I posted a HELP message to that effect because the grease fitting wouldn't come off the zerk. Long and short I got so banged up, sore and contorted I didn't walk straight for a week-- Advil, Tylenol, were my best friends. ps that's the last time I will buy anything worth using from Harbor Freight 3pointstar |
| All times are GMT -5. The time now is 02:49 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.